# How to adjust valves on toyota 1500 cc engine

Posted by Anonymous on

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
Goodluck!

Posted on Jan 02, 2017

Im assuming its an 4AGE!?
And here one of my favorites...;)
http://www.billzilla.org/4agstock.htm

Posted on Oct 07, 2008

This engine utilizes shims to set proper clearances, you will need a micrometer, valve clearance adjustment tool set for shimmed lifters,small magnetic arm, appropriate shim selecting charts (manufacturer will have this if you can get the nec. measurements).
Measure thickness of shims removed (using micrometer) and use this formula where T=Thickness of old shim; A=Valve clearance measured; N=Thickness of new shim required.
Intake valves:   N = T + (A - 0.02 mm (0.008 in.)) Exh. valves:     N = T + (A - 0.25 mm (0.010 in.))
Then you need to find shims as close as possible to the calculated values.
Valve clearances (cold) are as follows: Intake 0.15 - 0.25 mm (0.006 - 0.010 in.) Exhaust 0.20 - 0.30 mm (0.008 - 0.012 in.)
Note, if you are not familiar with precision measuring using a micrometer, this may be better left to a trained tech. These are high revving little power plants and you don't want a problem at 8K rpm.

Posted on Aug 06, 2009

×

my-video-file.mp4

×

## Related Questions:

### What is the adjustment of tapits in mazda b1600 gas

1586 cc engine is:

Valve side .012 inches (.30mm) on intake and exh
Cam side .009 inches (.22mm) on intake and exh

1272 cc engine is:

Valve side .010 inch (.25mm) intake ..012 (.30mm) exhaust
Cam side .007 inch (.18mm ) intake .009 (.22mm) exhaust

Jul 27, 2016 | Mazda Cars & Trucks

### I need the torque settings on a Toyota B enjine 3 litre diesel 1978 up

for the whole engine?, is in the fsm buy one? factory service manual.
what country? books and docs,vary by Country. so.....???????

this data is at toyota, they have a book
or google all day for engine specs.
best way to do that is use the real engine name.
how many cylinders.? sure 4
974 - B Second gen. - OHV/SOHC
• 1972-1988 - 3.0 L (2,977 cc) B
• 1984-???? - 3.0 L (2,977 cc) 11B?
see here for all B engines, they are not all the same.
80 hp (60 kW) @ 3600rpm.

so you need the data on the old B. 80HP
so, no hits.
sorry. id got to toyota or join their FORUM.

Dec 23, 2014 | Toyota Cars & Trucks

### Send the valve settings for a toyota 3L engine

Valve setting? Most engine valves have an automatic adjuster to self adjust the setting. You didn't say you had it apart. So, I'm thinking you have a dirty condition that would make the adjuster or valve tap. If so good additives just for both those conditions can restore the adjusting by cleaning and freeing the ailing parts. Try the link below for more info and needed product. Stops noisy engine valve tap in 10 minutes or free Add Driving ends tap

Nov 04, 2014 | 2007 Toyota Hilux 2.7

### How do you adjust the valves

you need to state which engine you have. Sometime in the 90's a lot of Toyota motors went to a shim system for valve adjustment so the usual simple valve adjustment techniques are not used. Job for a dealer or toyota specialist shop. You need to have a good reason to adjust them anyway. What is the compression in each cylinder./Are the valves burned?

Nov 16, 2013 | 2000 Toyota Celica

### Need valve adjustment on my dodge 1500 Ram pick up

I do not think you can adjust the valves on this engine. 360?

Apr 20, 2013 | 1998 Dodge Ram 1500 4WD

### 1987 toyota truck rattle between 1000 and 1500 rpms

Hi Lucas, What engine is fitted? If the engine is petrol, the rattling sound you have heard could well be an effect named 'pinking.' Its usually caused by the ignition timing being out of adjustment and related to the octane rating of the fuel. The ignition timing is set with a stroboscopic timing light. the ignition timing is set at 10 degrees before top dead center. Regards John

Feb 26, 2013 | 1987 Toyota Pickup

### Does any one know how many valves a 1986-1987 toyota carolla 1.6 has, I think it is 12 or 8

Hi there:
Keep in mind this information:

Japanese market engines:
* 3A-U 1.5 L (1490 cc) I4, 8-valve SOHC, carb, 83 hp (62 kW)
* 3A-LU 1.5 L (1490 cc) I4, 8-valve SOHC, carb, transverse mount, 83 hp (62 kW)
* 4A-GEU 1.6 L I4, 16-valve DOHC, EFI, 130 hp (97 kW)
* 2E 1.3 liter
* 5A-F 1.5 liter
* 5A-FHE 1.5 liter
* 4A-FE 1.6 liter
* 4A-GE 1.6 liter
* 4A-GZE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, wide valve angle, supercharger, 165 hp (121 kW) GT-Z
* 2E 1.3 L (1295 cc) I4 cylinder 12v SOHC 73 PS (54 kW; 72 hp)
* 4E-FE 1.3 L (1331 cc) I4 cylinder 16v DOHC 100 PS (74 kW; 99 hp)
* 5E-FE 1.5 L (1497 cc) I4 cylinder 16v DOHC 105 PS (77 kW; 104 hp)
* 5A-FE 1.5 L (1498 cc) I4 cylinder 16v DOHC 105 PS (77 kW; 104 hp)
* 4A-FE 1.6 L (1587 cc) I4 cylinder 16v DOHC 115 PS (85 kW; 113 hp)
* 4A-GE 1.6 L (1587 cc) I4 cylinder 20v DOHC VVT 160 PS (118 kW; 158 hp)
* 4A-GZE 1.6 L (1587 cc) I4 cylinder 16v DOHC supercharged 170 PS (125 kW; 168 hp)

North American market engines:
* 4A-C 1.6 L I4, 8-valve SOHC, carb, 90 hp (67 kW)
* 4A-GE 1.6 L I4, 16-valve DOHC, EFI, 112 hp (86 kW)
* 4A-F 1.6 L (1587 cc) I4, 16-valve DOHC, carb, narrow valve angle, 95 hp (71 kW)
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 102 hp (76 kW)
* 4A-GE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, wide valve angle, 115 hp (86 kW) 1988/89, 135 hp (100 kW) 1990/91 GT-S
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 105 hp (78 kW) 93-94 SD
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 100 hp (75 kW) 95-97 SD
* 7A-FE 1.8 L (1762 cc) I4, 16-valve DOHC, FI, narrow valve angle, 115 hp (86 kW) 93-94 DX and LE
* 7A-FE 1.8 L (1762 cc) I4, 16-valve DOHC, FI, narrow valve angle, 105 hp (78 kW) 95-97 DX, and LE

Thank you for using FixYa, have a nice day.

Jun 18, 2012 | Toyota Corolla Cars & Trucks

### How y adjust valve secunce on each piston i have a Tercel Gasolin Motor 1300 cc Y undertand a motor is 2E from 1992 sorry for my Inglish

u need a repair manual with the measurements and procedure--library section629 has engine books or bookstore--not a hard thing to do-piston has to be at top dead center then u fit a gauge between the tappet and valve and loosen the nut

Sep 02, 2011 | Toyota Tercel Cars & Trucks

### I want to know how much millimeter of valve clearance shoud we put on an engine of 1200, 1300, 1400,1500,1600,1700,1800,2000,etc cc

general rule of thumb on most modern engines except high compression GT engines from the 60s is 12th inlet and 15 exhaust ,nearly all modern engines from the late 70s onwards use this average setting so you cannot go wrong on manual adjustment tappets

Feb 22, 2011 | Toyota Corolla Cars & Trucks

### 2007 corolla cold idle:2000 warm idle: 1000 to 1500 Is this too high? How can it be adjusted?

no do not try changeing adjustment do you have check engine light on if so you need to get the code to see what is going on if not then it could be idel control valve but with what toy is going throw i would call dealer it may be in recall and see what they say this may be saftey isuses hope this helps

Feb 08, 2010 | 2007 Toyota Corolla

## Open Questions:

#### Related Topics:

347 people viewed this question

Level 3 Expert

Level 3 Expert