Question about 1994 Chevrolet Lumina
My 1994 Chevrolet lumina sedan will not start it turns over but it will get gas at times but then it floods and other times it acts like it doesn't get gas
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sorry my english is very fast Y live in Chile en Antofagasta , I need the manual del chevrolet lumina 3100 ls 1995 o 1996 I not imposible know information the mainten the my car . my e mail is firstname.lastname@example.org my name is MARIO ZANABRIA thank you
Posted on Jun 29, 2008
SOURCE: 1992 chevrolet lumina
I hade the same problem, but I figured it out, My car is a 1992 chevey lumina Base modle sadan, v6/3.1L This car is electricly based, regardless of your problem replace all Fuses and Relays your fule injection, heater cor, every thing. trust me.
MY CAR PROBLEM: car would stutter and want to die every time I came to a stop, or slowed down. When I start the car it would idle really high, when I shift in to drive it would go back to normal, for a little bit. I checked my electrical center located on passenger side under the hood. I found that my fule pump relay had blown out. this is the main reason for fule pump going out. theas fuses are the real thing that makes this car run. replace them all. thay are like 20.00 dollars a pop but it will save you hundreds.
SECOND: bought a bottle of fule injection cleaner. spray this into your throttle body, connected to the air filter. lots of gunk. after that car stopped stuttering and has not died yet. I did my maintance on 7/15/08
good place to start. good luck
Posted on Jul 24, 2008
There is None to my knowledge.. Ive done thousands of them.. Its way too hard to explain.. I did my first one by the seat of my pants.. only advice I can give is : Dont mix up the pushrods!! If ya do,, it'll warp valves bc the intake and exaust push rods are different lengths
Posted on Mar 11, 2009
There are screws that hold the door panel on. They are typically located behind the small round plastic covers. If you look at the bottom of the door handle, you will see them. Also on the door lever, there might be a screw. After removing all of the screws, take a flat head screw driver, and gently pry up the panel. There are plastic clips that hold the panel securely to the door. Doing this will pop them out one at a time. Once the door panel is loose, lift it up, and it should come right out. Be sure to disconnect any wiring harness connectors before fully removing.
Posted on Mar 24, 2009
Tips for a great answer:
Aug 11, 2014 | 1994 Chevrolet Lumina
Apr 15, 2013 | 1994 Chevrolet Lumina
Mar 25, 2012 | 1999 Chevrolet Lumina
Mar 07, 2017 | 1991 Chevrolet Lumina
Jun 13, 2017 | 1994 Chevrolet Lumina
Aug 07, 2011 | 1994 Chevrolet Lumina
Jan 14, 2010 | 1994 Chevrolet Lumina
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: