Question about Cars & Trucks

Open Question

Car loud roaring engine and hard vibration when starting engine

I started my car tonight and the engine(which has been making a little noise when driving, not much) roared super loud and was violently shaking. i turned the car of and swept my foot under the gas pedal to make sure there wasnt something stuck. started again and it still happened. turned off again and sat 2 min tried again and still happened... turned the defroster off to listen and the roaring stopped. what is wrong?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2001 LINCOLN CONTINENTAL ROAR WHEN ACCELERATING

Same problem with an LS...wheel bearings. Comes in the whole hub assembly. Just had it fixed for $340.

Posted on Sep 24, 2008

  • 16 Answers

SOURCE: roaring noise when speed gets about 50mph

could possibly be a wheel bearing.

Posted on Oct 13, 2008

autodr
  • 260 Answers

SOURCE: roaring noise when speed gets about 50mph

wheel bearings usually dont go at once, they progress. i would say to do it as soon as can so as not to risk ruining other parts like the wheel hub which is pressed into the bearing to support the wheel. approx. cost is $150 for bearing and about 1.5 hrs to complete. (all dependant on shop)

Posted on Dec 06, 2008

  • 1 Answer

SOURCE: tire shaking, roaring

i want to buy a 2006 nissan patherfinder tires make a roaring is this a problem

Posted on Jan 03, 2009

  • 58 Answers

SOURCE: Makes a low roaring noise when you are at crusing speed.

One of the front wheel bearings are bad. Jack it up and see if one is loose, the noise will usually change if you swerve back and forth while driving. Could also be a rear pinion bearing in the rear axle.

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 dodge Durango makes a loud roaring noise when I first start it in the morning. And does it when I drive. Its a little loud then the normal. What causing it?


check to see if it has a viscous fan hub. if so then it is the hub action doing what it is sup[posed to do. When the engine is shut down for a period of time the fluid is allowed to flow back to the drive section of the unit . ON start up it virtually locks the hub so that the fan is travelling at full engine rpm and the noise you hear is the air flow through the radiator After about 30 seconds to a minute the fluid is pumped back to the reservoir and the fan hub drive slips and the fan slows down and the noise goes. IT will come and go on a properly operating hub as the coolant temperature engages and disengages the hub drive . You should notice it at stop lights , slow moving traffic and hard work at high rpms.

Dec 17, 2014 | 2002 Dodge Durango

1 Answer

Hi i have a astra 53 plate a load roaring like noise has started ive checked wheels for play and noise nothing breaks all fine could it be drive shaft there was movement when i pushed it back and forth...


There is always a little movement in the driveshaft, but a drive shaft that has lost its weights and that has come off balance can cause noise and vibration, should also inspect differential as this can also cause noise and vibration

May 05, 2014 | Cars & Trucks

2 Answers

Loud roaring noise and vibration, gets louder as i press the gas, same in park, and also while starting the car it now seems like it hesitates to crank at first then is fine.


Not sure of starting problem, but you may have bad engine mounts causing the vibration/roaring noise. hav ethe engine mounts check. These vehicles have a history of bad mounts especially after 100K miles or more.

Oct 23, 2013 | 2003 Ford Focus

2 Answers

Front Driver Side


If the noise changes when you turn side to side while driving you have bad wheel bearing. (Hub Assy)
Hope this helps you,

Oct 09, 2009 | 2001 GMC Denali

1 Answer

Ford Windstar Roaring Noise


If the vehicle is moving I would suggest the look at the wheel bearings. they could be warned out.

May 26, 2009 | 2004 Ford Explorer

1 Answer

Makes a low roaring noise when you are at crusing speed.


One of the front wheel bearings are bad. Jack it up and see if one is loose, the noise will usually change if you swerve back and forth while driving. Could also be a rear pinion bearing in the rear axle.

Dec 24, 2008 | 2003 Chevrolet Avalanche

1 Answer

Tire shaking, roaring


i want to buy a 2006 nissan patherfinder tires make a roaring is this a problem

Dec 19, 2008 | 2006 Ford Taurus

3 Answers

Loud roaring noise


jack up front of car get hold of tyre an see if u get any play if u do u may get away with nipping them up a bit

Nov 19, 2008 | 1999 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...