Question about 1997 Toyota 4Runner
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The ground circuit for the driver side door switch is compromised, or the door switch is bad. Try this: Remove the black rubber cover from the door swich. Using a 10 millimeter wrench or socket, loosen & tighten the switch retention bolt. See if the dome light flickers. If so, the ground on the switch is bad, & just needs cleaned up. If not, remove the switch, and touch the wire behind the switch to the body,or the bolt hole. If the dome light lights, you need a door switch. Your problem is entirely in the door switch/ground/wiring. Hope this helps, and thanks for choosing FixYa.
Posted on Oct 28, 2008
There are 2 metal rods that hook into the handle. They are retained by a plastic clip that is prone to wear out. You must remove the inner door panel and replace these clips reataching the rods. Parts available through Toyota.
Posted on May 10, 2009
Since you can get the door open, half the battle is already won. Yes, open the door, pull the interior door panel and take a look around. Watch inside with a flashlight (towards the rear of the door) as you roll the window down to see if you can see what it's snagged on.
Posted on Jun 03, 2010
Tips for a great answer:
Sep 02, 2015 | 1997 Toyota 4Runner
Dec 31, 2010 | 2003 Toyota 4Runner
Jun 03, 2010 | 1997 Toyota Avalon
Feb 23, 2010 | 1997 Toyota 4Runner
Jan 05, 2010 | 1997 Toyota 4Runner
May 10, 2009 | 1997 Toyota 4Runner
Apr 26, 2009 | 1996 Toyota 4Runner
Jan 12, 2009 | 1990 Toyota 4Runner
Nov 12, 2008 | 1997 Toyota 4Runner
Oct 27, 2008 | 1997 Toyota Corolla
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: