Question about 1997 Honda Civic

Open Question

Torque settings for valve cover bolts on 1997 Honda Civic

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
jamesmac
  • 71 Answers

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

7.3 ft.lbs Go from middle, to back right, to back left, to front right, to front left. if your standing in fron of your header.  11 or over usually shears the bolt.(if you have stock bolts)
Make sure you dap some rtv on the sharper 4 corners of the gasket where the cam seals are.

James Mac

Posted on Sep 13, 2008

Ad
  • 260 Answers

SOURCE: Motor Oil leaks from 1999 Honda Civic EX

make sure they are tight
could be time for head gaskets
make sure the old gasket from the old filter came off the block sometimes they come off old filter and stick this causes a leak due to improper seal.

Posted on Apr 10, 2009

SOURCE: need torque settings for honda ballade cylinder

dear friend-your torque setting is cold 66 nm

Posted on Jul 23, 2009

ZJLimited
  • 17970 Answers

SOURCE: 1997 honda civic firing order, 4 cylinder

1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise.

cdd80c6.gif

I hope help you with this, remember rated this post. Good luck.

Posted on Aug 25, 2009

Testimonial: "Thanks, runs like a charm, now!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many pounds would I need to torque down the bolts on a 94 Honda Civic engine underneath the valve cover


Check your shop manual or buy one. Don't take some unknown person's opinion on something so critical.

Apr 07, 2015 | Honda Cars & Trucks

2 Answers

I cant get off the timing belt cover on a daewoo leganza dohc 2000 do i have to take the pully off. the metal peace behind the motor mount is preventing from coming off


thats correct the engine mount bracket needs to come off also if you need to remove rear timming belt cover to replace say the water pump or do some other repair, 3 torque head bolts are very tight and loctited in usually use correct torque socket and breaker bar to crack, its a bit of a tight squease also.

Aug 25, 2011 | 2000 Daewoo Leganza

1 Answer

1997 Honda Accord, 4 Cl. Replaced valve cover gasket, oil still leaking somewhere directly below the valve cover?


Sounds to me like you have either forgot to put back on the breather tube that runs off of the top of the valve cover, or, you did not set your valve cover correctly, or the torque is not correct on the cover itself.
8.7ft/lbs and the torque sequence is inside to outside (torque the inner-most nut between cyl 2 & 3 first, then the one above it then alternate sides on the outside ones). Recommended Hondabond is on the corners and the cam cap areas.

Jun 11, 2011 | Honda Accord Cars & Trucks

1 Answer

Hi im fixing a 89 honda civic have everything to put it back together but the torque settings for mains,connector rod bearings head stage 1,2,3 an the rest thanks


CRANK SHAFT PULLEY BOLT TORQUE IS 83 FT LBS. MAIN BEARINGS TORQUE IS 48 FT LBS ROD BEARINGS TORQUE 23 FT LBS. YOU NEED A BEARING SEQUENCE GET PIECE OF PAPER WRITE NUMBERS 9 5 1 3 7 AND UNDER THIS NUMBER LINE NUMBERS UP ON EACH OTHER WRITE DOWN NUMBERS 8 6 2 4 10 YOU HAVE 10 CRANKSHAFT MAIN BEARING BOLTS. WHEN YOU LINE UP BOTH NUMBERS YOU WILL START TIGHTEN BOLTS 1 AND 2 TIGHTEN BOLTS 3 AND 4 TIGHTEN BOLTS 5 AND 6 TIGHTEN BOLTS 7 AND 8 TIGHTEN BOLTS 9 AND 10 YOU ARE TIGHTEN BOLTS IN A CRISS CROSS PATTERN. BESURE TO POUR OIL OR LUBRICATE CRANKSHAFT AND BEARINGS WITH CLEAN ENGINE OIL.WHEN YOU TORQUE MAIN BEARINGS TORQUE ALL THEM TO 20 FT LBS AND SECOND PASS TORQUE ALL BOLTS TO FINAL TORQUE 48 FT LBS. IF YOU RUN TO ANY PROBLEMS. YOU CAN BUY A HAYNES REPAIR MANUAL IT CAN HELP YOU.

Mar 02, 2011 | 1989 Honda Civic

1 Answer

Torque para cabeza honda civic motor 1.6


1996-97 Civic and Civic del Sol
1.6L (D16Y5, D16Y7 and D16Y8) ENGINES

Tighten the cylinder head bolts to their final torque specification in four steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows:
  1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
  2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
  3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
  4. Step 4: Retighten only the two center bolts to 49 ft. lbs. (67 Nm).

Hope helps (remember to rate and comment this).

Sep 23, 2010 | 1997 Honda Civic

2 Answers

Had the timing belt break on my 1997 Honda accord change the belt and water pump did compression test cause motor was shaking even do the timing was set right so had mechanic look at it and said it bent a...


yes a bent valve is a very hard task, you must of couse pull the engine cylinder head off and then replace the valve, this takes special tools.

May 19, 2010 | 1997 Honda Accord

1 Answer

WHAT ARE THE TORQUE SETTINGS AND SEQUENCE OF CYLINDER HEAD BOLTS ON 1999 HONDA CIVIC


Its better for you to buy the manual book. Thats my best suggestion for you.

Mar 01, 2010 | 1997 Honda Civic

1 Answer

1997 honda civic, it shut down while running (50-55mph), tried to turn it on and sounds like it trying to start but wont go...


i hate to say this but you may have broken your timing belt, and thats real bad on a honda. just loosen the valve cover bolts and remove the plastic top cover over the belt and see if the belt moves then cranking the engine, i hope for your sake this isn't the case because hondas are equipped with an interference engine which means when the timing belt goes the valves hit the pistons

Nov 25, 2009 | 1997 Honda Civic

1 Answer

Amount of torque on valve cover bolts


it's 12 nM which appears to convert to about 9 foot lbs of torque.... if your torque wrench has nM use that.

Robert

Please take a moment to rate this solution thanks

Apr 21, 2009 | 1997 Plymouth Neon

2 Answers

Replacing head gasket on 1995 honda civic, require torque specs and secquence


wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Sep 13, 2008 | 1995 Honda Civic

Not finding what you are looking for?
1997 Honda Civic Logo

Related Topics:

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...