Question about 2001 Mazda Protege

Open Question

When change transmission fluid in mazda protege 2.0 L?

No record of last changed at 98000 and looks brown.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ewashmidas
  • 362 Answers

SOURCE: 1995 mazda protege

If you have a manual transmission these are the check and fill plugs.
a429cb0.png

Posted on Jan 31, 2009

Ad
  • 13 Answers

SOURCE: 1993 mazda mx6 transmission is not slipping, but will not shift into higher gears. Will run at high RPM's and not shift up. Any suggestions on what it might be.. Mechanical, electrical, fluid change,

sounds like a shift solenoid in the trans.

Posted on May 10, 2009

  • 5 Answers

SOURCE: transmission

Hey i just had the same problem with my car. the 3rd gear shift fork was broke off in the transmission in my car. however it might just be ur shift linkage. you can check to make sure the pin is moving in and out of the tranny from underneath the car (laying on the ground its on the left side just before the echaust bends to go up to the headers.) and if it is moving it most likely is the shift fork.
But after i had my transmission done my factory keyless entry, interior lights, and headlight door buzzer (when u get out of the car with the lights on) does not work.... also my odometer trip meter resets itself everytime i shut my car off. im still working on finding out what that is.

Posted on May 28, 2009

Hrnsly
  • 154 Answers

SOURCE: 1997 Mazda protege LX 1.5 automatic transmission

You are going to need a transmission shop. Mazdas do not always throw codes. You have an early OBD transmission, which do not send out many codes.

Posted on Aug 03, 2009

wracefans24
  • 1985 Answers

SOURCE: 2003 mazda protege transmission problem, how do i

you best bet is a transmission shop to check fluid pressure values,not one of those aamco type places,

Posted on Dec 27, 2009

Testimonial: "thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission slips,and fluid is black with burnt smell


You can change the fluid and filter, but the transmission is on its last leg and you may be lucky enough to get a few more thousand miles out of it.

Mar 02, 2011 | 1993 Mazda Protege

1 Answer

Ihave a 1997 mazda protege and after having it for a week I noticed the transmission will slip when going into 3rd gear (automatic transsion) the fuid is brown and I was worried about really messing things...


.One of the most common causes of a slipping transmission is a low automatic transmission fluid level, also a dirty and/or clogged automatic transmission filter can impede the normal flow of automatic transmission fluid throughout an automatic transmission and cause the transmission to slip. Adequate, unobstructed transmission fluid flow is necessary for the optimal operation and function of an automatic transmission, including the function of the transmission bands and gears, two transmission components that routinely cause transmission slippage.Another cause would be faulty torque converter action and maladjusted transmission band.

Jan 01, 2011 | 1997 Mazda Protege

1 Answer

When I first start my 1995 Mazda Protege, it will not go into gear unless you let the car warm up for at least 10 minutes or longer


If you have an automatic transmission, check the transmission fluid level. If the fluid level is low, the transmission will not engage.

If you have a manual transmission, check the clutch fluid level. Look for a leaky master cylinder or slave cylinder.

Jan 29, 2010 | 1995 Mazda Protege

2 Answers

1997 Mazda protege LX 1.5 automatic transmission


You are going to need a transmission shop. Mazdas do not always throw codes. You have an early OBD transmission, which do not send out many codes.

Aug 02, 2009 | 1997 Mazda Protege

1 Answer

I have a 2001 mazda protege automatic transmission. As i drive it seems like someone just shifted the car in neutral, after a couple of seconds it kicks in gear and drives, but the same thing happens...


It is possible that your transmission fluid needs to be changed. Get that done, and it that does not solve your problem you may have transmission problems all together.
Hope this helps

Jun 15, 2009 | 2000 Mazda Protege

3 Answers

I have a 1993 Mazda Protege. My clutch suddenly


check the line from the reservoir to the transmission for leaks, unfortunately its most likely the slave cylinder in the bell housing. Look under the bell housing of the transmission for any brake fluid at the weep hole as that would be your indicator of the slave cylinder leaking.

Nov 02, 2017 | 1993 Mazda Protege

1 Answer

1995 mazda protege having problems running during aceleration


change the transmission fluid, replace the oil and oil filter check spark plug cables, check starter coilpak, and make sure there is coolant

Jul 02, 2008 | 1995 Mazda Protege

Not finding what you are looking for?
2001 Mazda Protege Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...