Question about 2003 Chevrolet Astro

Open Question

2003 astro van abs module

Abs control module replacement

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1997 chevy astro van

The control module is located just behind the ignition coil. Sorta hard to get to but we got it and the van is running great.

Posted on Dec 22, 2008

scottyoung56
  • 89 Answers

SOURCE: need to replace driver side door handle

you need to start by taking off the inside of the door and then take the three bolts on the side of the door where you see the latch undo the handle from the inside of the door put the new one in and go in reverse to put it back together

Posted on Aug 13, 2009

  • 1 Answer

SOURCE: I have a 2003 Chevy Astro Van and the air does not

Check vacuum line running from left side of fuel injection to the right side by the blower motor it is a small diameter line. if that came apart you will only get air coming out of defroster exits.

Posted on Jan 03, 2010

ZJLimited
  • 17970 Answers

SOURCE: where is the EBCM module located on a 2000 Chevy

The EBCM (Electronic Brake Control Module) is mounted to the BPMV (Brake Pressure Modulator Valve) located at the left front (lower) engine compartment.

EBCM Removal & Installation Procedure

  1. Remove the Brake Pressure Modulator Valve (BPMV). Refer to the Hydraulic Control Unit (BPMV) procedure in this section.
  2. Remove the 4 T-25 Torx® bolts (1) from the EBCM (2). (click image for zoom)

    zjlimited_1272.jpg

    Fig. Bolts (1), EBCM (2), bracket (3), bolts (4) and BPMV (5)

  3. Disconnect the 2-way ABS pump motor connector.
    WARNING Do not use a tool to pry the EBCM or the BPMV. Excessive force will damage the EBCM.
  4. Remove the EBCM (2) from the BPMV (5). Removal may require a light amount of force.
    1. Do not reuse the EBCM mounting bolts. Always install new bolts.
  5. Clean the EBCM to BPMV mounting surfaces with a clean cloth.
To install:

WARNING Do not use RTV or any other type of sealant on the EBCM gasket or mating surfaces.
  1. Install EBCM (2) onto BPMV (5).
  2. Install the 4 EBCM bolts (1).
    1. Tighten the 4 bolts to 39 inch lbs. (5 Nm) in an X-pattern.
  3. Connect the 2-way ABS pump motor connector to the EBCM.
  4. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
  5. Use the scan tool to check and clear DTC memory.

Hope this helps.

Posted on May 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vehicle: 03 Chev Astro Cargo Van. Style: 2WD/RWD; 4.3 liter Engine Problem: Yesterday, 'Service Engine Soon' light came on, today Brake light and ABS Light came on


It could be many different of things, but I would check the charging system and battery first. I have had many under charging GM vehicles that all the dash warning lights would light up.

Jun 05, 2015 | 2003 Chevrolet Astro Cargo

1 Answer

Need to know if my 2003 kia sedona has abs


ABS was optional on 2003 models.
You should be able to see the ABS module and components in the engine compartment if your van has ABS.

Apr 12, 2013 | 2003 Kia Sedona

1 Answer

Location of body control module on a 1997 chevy astro van?


1997 Chevrolet Astro is not equipped with a "Body Control Module". What, exactly are you having problems with?

Jun 29, 2011 | Chevrolet Astro Cars & Trucks

2 Answers

Abs light is on


When the ABS (Anti Lock Brake System) light is on it means the systems control module has detected a failure and the ABS is disabled, this means you just have regular non ABS brakes. To find out what the fault is requires the ABS control module be scanned with a special tool to see what fault codes show up.

Jan 18, 2011 | 1994 GMC Safari

1 Answer

I am trying to remove an abs line on my 2003 astro van.


follow the wire there has to be a plug it might be on the other side of a rubber gromit but it is there

Dec 31, 2009 | 2003 Chevrolet Astro

1 Answer

1997 chevy astro van


The control module is located just behind the ignition coil. Sorta hard to get to but we got it and the van is running great.

Dec 21, 2008 | 1997 Chevrolet Astro

Not finding what you are looking for?
2003 Chevrolet Astro Logo

Related Topics:

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...