Question about 1999 Chrysler Town & Country
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
1.) Open the hood of your van
2.) On the passenger side of the vehicle, look behind the headlight
enclosure. You will see a set of wires running into the back of it.
This is the power clip. Either with your hand or a flat-head
screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.
Posted on Oct 29, 2009
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
SOURCE: how to replace starter motor
Hi. Here is the procedure. Jack the car up,secure good with jack stands,block wheels and parking brakes on.Disconnect battery terminal,use 15mm wrench and 15mm socket,remove 2 bolts through transmission bell housing,remove nut from battery cable to starter,disconnect small wire to solenoid
Posted on Sep 13, 2010
Tips for a great answer:
Oct 27, 2017 | Chrysler Cars & Trucks
Jan 14, 2016 | Chrysler Cars & Trucks
Nov 29, 2014 | 1999 Chrysler Town & Country
Apr 02, 2013 | 1997 Chrysler Sebring
Jul 08, 2011 | 1999 Chrysler Town & Country
May 11, 2011 | 1999 Chrysler Town & Country
Feb 07, 2011 | 1999 Chrysler Town & Country
Nov 27, 2010 | 2005 Chrysler Town & Country
Nov 06, 2009 | 2005 Chrysler Town & Country
Oct 27, 2009 | 2003 Chrysler Town & Country
Oct 10, 2014 | 1999 Chrysler Town & Country
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: