Question about GMC Cars & Trucks

Open Question

How to fix digital gas gauge in 1989 gmc s15 - GMC Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75077 Answers

SOURCE: the digital fuel and temperature gauge is not working

u will need to replace the fuel gauge sending unit.

Posted on Mar 27, 2009

  • 701 Answers

SOURCE: what is the firing order for an 89 gmc s15 2.8

Hello cman0906: My name is Roger and I will answer your question. The fire order is 1 5 6 4 3 2. See picture. Please rate the answer you recieved. This way we know your answer was correct. Should you need further halp please just ask. Thank You for using Fix Ya. Roger6bd011d.jpg

Posted on Jul 31, 2009

ZJLimited
  • 17970 Answers

SOURCE: firing order for a 1986 gmc s15

FIRING ORDERS

To avoid confusion, ALWAYS replace spark plug wires one at a time.

The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.

db45c9c.jpg

Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise

cf6af5d.jpg

Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

5c33822.jpg

Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

cae855e.jpg

Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise

9674e44.jpg

Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise

I hope help you with this (remember rated this help) Good luck.

Posted on Oct 05, 2009

  • 1 Answer

SOURCE: where is the fuel filter

I have 2 1989 GMC S-15 trucks (actually one of them i bought for my daughter). Anyway, the 2.5 four cylinder one has the fuel filter on the firewall between the brake master cylinder and the engine. The other one is a 4.3 six cylinder and the fuel filter is on the inside of the frame rail on the driver's side, kind of under the cab near the fuel tank. Hope this helps.

Posted on Oct 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 gmc s15 pick-up 2.5 4 cylinder fuel filter location


under drivers side frame rail in front of gas tank

Aug 30, 2015 | GMC Cars & Trucks

1 Answer

1989 gmc s15 starts then dies


Your best bet ,take it to a qualified repair shop that has the diagnostic equipment to diagnose the problem . You already replaced a part that didn't need to be . This problem could be caused by any number of thing's . I would only be guessing without testing , are you prepared to replace every part suggest on here . Do you have a OBD 1 scan tool to view engine sensor data ? Do you know what that is ? Could be fuel related , crankshaft postion sensor , coolant temp.sensor , ignition module . Leaking fuel pressure regulator ,injectors leaking .

Jul 24, 2017 | GMC S-15 Cars & Trucks

1 Answer

1989 gmc s15 starts then dies


you need to check the battery cables and clean them and clean them, or it could be the coil needs replaceing or there might be a fuse blowed somewhere.

Mar 17, 2012 | GMC S-15 Cars & Trucks

1 Answer

1989 gmc s15 2.5 - check engine light comes on - the code states a running lean condition. It comes on and goes off. When it goes off, I'm assuming it's going into closed loop and runs poorly and acts...


Hook up a fuel pressure gauge to the schraeder valve, and then operate the vehicle. I'll bet you will see a corolation between the performance and the fuel pressure. This would indicate a failing fuel pump.

Feb 23, 2011 | 1989 GMC S-15 Jimmy

1 Answer

1989 GMC S15 4X4 won't go into 4 wheel drive


Check the linkage . and also if you recently bough it and have neer tryed it check front driveshaft.

Dec 27, 2010 | 1989 GMC S-15 Jimmy

1 Answer

My gas gausge doesnt work in my 89 gmc sierra. How


If all your other gauges work, more than likely you have a bad sending unit in the gas tank or bad ground to the sending unit.

Feb 12, 2010 | 1989 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...