Question about 1990 Geo Prizm

1 Answer

Fan runs all the time when car is on

I put my motor from a 91 geo prizm into a 90 geo prizm body but now when ever the car is on the fan is always running is the wiring different or what could it be?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I did the same thing and had the same problem. I believe I replaced a ten amp fuse in the engine compartment and fixed it. Really pissed me off.

Posted on Nov 01, 2008

  • kelsey marsh Jan 30, 2009

    Bad ground. That"s what it was.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Starts after a push start but won't keep running. 1993 Geo Prizm. Why?

what engine, 1.6L or 1.8L 4a or 7a toy engine?
prizm= corolla.. so....
no matter
ever get a full tune up this decade, cures like 90% of that.

Sep 29, 2015 | Geo Cars & Trucks

2 Answers


It is defiantly AN ELECTRICAL PROBLEM. Try checking your fuses, use a DMM to test for continuity. I have had fuses look good but fail the continuity test.

Apr 12, 2014 | 1994 Geo Prizm

1 Answer

91 prizm want crank after hitting deer hit

the deer put a hex on your car. find live deer, and beg for mercy.
ok, tin hat gone

battery cracked, acid leaked out... end of life.
cables to same broken or loose.
a/T gear shift, not in park, and foot brake set, wiggle both.

one can hot wire a starter to test that. its not hard. just a jumper wire.
if hot wire cranks, then the A/T shifter path is broken.

Sep 04, 2013 | 1991 Geo Prizm

1 Answer

Does a 1993 geo prizm 1.8L lsi have two temp sensors?

buy the manual. and RTM,
and yes, Air , water, and on a stock car up to 3 coolant sensors.
The ECT runs the ECU. tells ECU coolant temp.
my guess is the coolant gage is dead? RTM
on most 93 car, the Guage has its own sensor, (isolated)

joint venture, GM/toyota with 3 engine used.
1.8L or 1.6L
toy engine, 4aFE, 7AFE or 4AG
open hood look
or use the GM RPO tag
or Use the VIN to find motor used.
for docs?
Geo Prizm factory service manual, Duh?;jsessionid=D19D723C2EDB4A9FE12E7C01C0677129?_sacat=0&_nkw=geo+prizm+shop+manual&_nkwusc=geo+prizm+shop+manaul&_rdc=1

Feb 18, 2013 | Geo Prizm Cars & Trucks

1 Answer

1984 Geo Prizm run but drumping to too much gas

Might be anything but first I will inspect and replace the air filter. Other reason might be a lover compression test result. If it is 70 psi, then engine hesitates, but some people continue to drive and when it goes down to 60 psi the engine refuses to run .
One more reason might be ignition timing and the strength of spark. The distributor, wires and spark plugs have to be inspected, and replaced if necessary.
Finally another reason might be valve timing. This is related with the timing belt. If this is replaced please disregard this. I had a 90 ties Geo Prizm, and was making an average 30 miles per gallon.
Gradually dropped at 26 mile per gallon. I replaced the timing belt and a I got again 30 miles per gallon.
If your car will be sent in our car repair shop, these will be the first tests we will perform, to find the problem. Geo Prizm is a nice car, and very easy to take care with. If you will check this points by yourself, then you can save money and hope solve your problem.

Nov 04, 2010 | 1996 Geo Prizm

2 Answers

How do I replace the Timing Belt on my '91 Geo Prizm?

Remove all nessary parts to access cover. Remove cover. Line up the timing makrs before removing old belt if car is still in running condition. Loosen the belt tensioner and remove belt. Install in reverse order making sure to load tension back on belt at the tensioner.

Mar 05, 2010 | 1990 Geo Prizm

1 Answer

My 1995 geo prizm idles roughly in park and the engine dies when you put it in gear. it doesn't matter if the engine is cold or hot and forget trying to use the a/c. everything works fine while moving at...

The problem is in the idle air control valve which controls the idle of the motor and idles the motor up when an extra load is put on the motor. It is mounted on the throttle body and is a little round barrel looking item with a plug in on the end of it. change this part out and clear the engine code in the computer and it should fix the issue.

Sep 21, 2009 | 1995 Geo Prizm

1 Answer

91 geo prizm, the air conditioning works great until I turn the key off to park. While the car is still hot the fan will not turn on again until the car cools off. Then everything works great. Do I have...

When the engine is not running the belt is not turning the ac compressor which will not blow cold air unless ac pump is running so engine has to be running

Jul 28, 2009 | 1991 Geo Prizm

1 Answer

1992 Geo Prizm fan

your relay fuse is going bad replace it asap or your going to have to replace your head gasket next

Jan 21, 2009 | 1992 Geo Prizm

Not finding what you are looking for?
1990 Geo Prizm Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides