Question about 2004 Jaguar X-Type
I tried releasing anything inside by feeding in a Cd 1/2 way and it did feel like it may have caught on another CD. Cant see tiny hole for a paperclip and tried tweezers but could not grab. Help
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check out with your dealer as you might have a recall to fix this problem.
Overheating - Cooling Fans Inoperative - Replace Module Prior To Retailing - Service Action S932
This Service Action Applies to Vehicles That Have Not Been Retailed
The cooling fan module on X-TYPE vehicles may fail under certain circumstances. There are various root causes but the design and quality of the printed circuit board within the cooling fan module are the most significant. The NAND gate used in the circuit is detective causing multiple failure modes, this can result in high engine temperature and overheating due to the cooling fans not operating.
A change has been implemented in production from VIN C91720. On these vehicles a 'Philips' printed circuit board has been used that has a modified voltage spike protection strategy.
To prevent customers from experiencing this issue, install the latest specification cooling fan module on 2002-03 MY X-TYPE vehicles within the above VIN range that have not been retailed.
1. Install new cooling fan module (see Workshop Manual, JTIS CD ROM, section: 303-03, SRO 26.25.38).
Warranty claims should be submitted quoting S932 in place of the warranty fault code together with SRO: 26.25.38 and the relevant part number. This will result in a labor time allowance of 0.8 hours to replace the cooling fan module and payment for the part used. Should the vehicle be brought back into the workshop for this action alone to be undertaken, an additional labor time allowance of 0.1 hours can be claimed quoting SRO: 10.10.10 for drive in/drive out.
Warranty claims should be submitted quoting the information found in the table. This will result in payment of the stated time and, where applicable, parts/miscellaneous expense codes.
The options that allow for drive in/drive out may only be claimed when the vehicle has been brought in to the workshop for this action alone to be undertaken.
The SROs and parts items listed above have been included for information only, there will be no requirement to enter the parts or SROs onto the claim.
NOTE: Always perform a DDW claim search first to determine whether this service action has been performed on this vehicle. The warranty selection under the vehicle inquiry will give a listing of all claims against the vehicle. If this service action number appears in the program code field, do not perform this service action.
Posted on Jan 19, 2009
If your bonnet will not release, there is a rubber plug inside fender located up in
the wheel well under the latch. Remove the plug, stick a screwdriver up and pry the latch
back. The hood / bonnet will open.
Posted on Mar 01, 2010
If I am understanding your post, I believe you do have a levelling
system and it should be near your light switch on the dash. It is
the type of switch that you depress first, it then springs out and
you turn the small knob (just like your instrument panel lights
adjuster next to it.) What you do not have perhaps, if your car is
not fitted with HIDs (high intensity headlamps), is the automatic
levelling system which is a legal requirement when HIDs are fitted
due to the high power of the lights....
if you don't have a self-levelling system then you'll have a manual
system, operated by a knob under the light switch so that you can
adjust to compensate for a heavy load in the rear of the car.
Posted on Mar 27, 2010
Testimonial: "I did see the little knob on the dash under the headlight switch. i thought it was to dim the dash lights i will check it out and let you know. "
Tips for a great answer:
Sep 21, 2014 | Cars & Trucks
Jun 22, 2014 | 2003 Mercedes-Benz E-Class
Oct 19, 2012 | Cars & Trucks
Jul 22, 2011 | 2006 Honda Accord
Jan 16, 2011 | 2004 Toyota Highlander
Aug 30, 2010 | 2001 Dodge Grand Caravan
Dec 22, 2009 | 2004 Chevrolet Malibu
Aug 17, 2009 | 2004 Hyundai Santa Fe
Apr 27, 2009 | 2004 Chevrolet Silverado 2500HD
Jul 17, 2008 | Volkswagen New Beetle Cars & Trucks
562 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: