Question about 1994 Saturn Sc
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you have high resistance in secondary ign. system (plug wires, ign.coil) this will cause this code to set. make sure you are using a high quality spark plug wire set. not from autozone!!! and denso non platinum tipped spark plugs. also use a diaelectric grease on plug wires to keep moisture out.
Posted on Mar 31, 2009
There is a (#1 Ignition Fuse) located in the under hood fuse box. Remove the fuse to make sure it is not blown. If the fuse is good we will have to check for injector pulse. Let me know if you have a 12 volt test light and you will need a "noid" light to figure out if the ECM is driving the injectors.
Let me know.
Posted on Apr 25, 2009
Try replacing the belt tensioner. Comes out easily, once you figure out access to it. Remove inspection panel inside front passenger side wheel well. Tensioner is right there, two bolts. If the spring gets weak, the belt will squeak.
Posted on Feb 18, 2010
Sounds like the the Bendix is bad in the starter, which pushes out the drive gear to engage the flywheel. You'll need to replace the Bendix or the starter. It's a bit tough to get to the starter, it is underneath the intake manifold.
Posted on May 24, 2010
Tips for a great answer:
Dec 18, 2013 | 1994 Jeep Grand Cherokee
Dec 07, 2010 | Pontiac Grand Am Cars & Trucks
Oct 26, 2010 | 1993 Saturn SC2
Jul 22, 2010 | 1993 Saturn SC2
Jun 19, 2010 | 2003 Chevrolet Cavalier
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: