Question about 2006 Hyundai Sonata
It's the upper control arm bushings. Had the same problem. You can get the whole control arm for about $30 and up. Looks like a wishbone and the rubber bushings work themselves loose and rub on the frame.
Posted on Jan 09, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
That's a hub bearing. Replace the one that's doing it. I'm assuming this 'roar' is coming from the front, NOT the rear.
Posted on Jun 28, 2009
wheel bearing could sieze how loud is it? can you hear it in the car with the windows down? also jack the car up and wiggle the tire any movement? grab the top and the bottom pull and push diffrent ways any clunk or looseness if not you might be ok for a while once it gets loose or real bad clunk replace it hope this helps please leave good feedback thanks
Posted on Sep 18, 2008
You need new drive shaft assemblies (AKA halfshafts) which include both inner and outer CV joints and shafts. And although it's normal for only the passenger side wheel to spin in forward gear when in snow or mud, the drivers side should spin when the wheels are in the air. You either have a sticking brake caliper or bad wheel bearing on the drivers side. With 300K on your Hyundai the cost of the repair is more than the car is worth. Sell it for parts and buy a new car.
Posted on Jul 27, 2009
Tips for a great answer:
Apr 18, 2015 | 2007 Hyundai Elantra
Feb 25, 2014 | Dodge Stratus Cars & Trucks
Aug 03, 2017 | 2006 Hyundai Elantra 2.0
Aug 11, 2010 | 2007 Chevrolet Silverado 2500HD
Jun 24, 2010 | 2003 Oldsmobile Alero
Oct 04, 2009 | 2005 Nissan Sentra
Feb 23, 2009 | 1999 Volkswagen Passat
1,186 people viewed this question
Usually answered in minutes!