Question about Ford F-250

1 Answer

Front wheel assembly diagram - F-250 Ford Cars & Trucks

Posted by on

  • Jeremy W.
    Jeremy W. Feb 22, 2012

    Need to know the year, make, model, and engine size of your vehicle?

  • yadayada
    yadayada Feb 22, 2012

    Ditto

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,370 Answers

For front wheel assembly diagram and replacement,click the link below and go through procedure:----Front wheel hub assembly Diagram and replacing procedure? http://howtobyme.blogspot.in/2012/02/front-wheel-hub-assembly-diagram-and.html
----------Front wheel assembly diagram to replace wheel bearing? http://howtobyme.blogspot.in/2012/02/front-wheel-assembly-diagram-to-replace.html
-------------How to replace Front wheel bearing? http://howtobyme.blogspot.in/2012/02/how-to-replace-front-wheel-bearing.html
-----------Check all 3 links one by one.This will help.Thanks.

Posted on Feb 22, 2012

  • Jeremy W.
    Jeremy W. Feb 23, 2012

    How can you post a solution when you have no idea what year the vehicle us or if it's two wheel drive or four wheel drive?

    Furthermore you diagrams you have suggested are for an Isuzu, an explorer, And a corrola. None of which are even closely relevant to an f250.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: i need a free diagram for 93 chevy blaizer frint

please contact me at chevy4x4k1500@aol.com and I will print and fax you a copy just give me the last 8 of the VIN and a fax # or call jason @ GENERAL TRUCK SALES at 800-382-7717.

Posted on Aug 03, 2009

  • 196 Answers

SOURCE: Left front wheel clicking. think wheel bearing.

Clicking, especially while turning usually more so points to a problem with the CV joint, or axel, the easiest way to test a wheel baring is to jack up that side of the truck until the tire is off the ground, leave the lug nuts on and try to wobble the tire in all directions, if everything seems solid it is not likely the bearing casuse the sound, another note when a bearing starts to go bad, it usually hums opposed to clicks. Im sorry i dont have a diagram, but this proceedure should get you on the right track in diagnosing the issure, good luck!!

Posted on Mar 21, 2010

polarcycle
  • 1392 Answers

SOURCE: 2005 ford escape assembly diagram for the front axle

If they are sealed bearings, you will need a press to get them out. If they are bolt in, just remove the brake pads/rotors, then the axle nut, then the bolts holding the wheel bearing in. Install in reverse order.

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram for front wheel bearings assembly


Here is the manual link look up 40.01 for front end assemble.
http://www.scribd.com/doc/25857285/Porsche-930-Turbo-1976-1984

Mar 07, 2015 | 1982 Porsche 911

1 Answer

We need a picture of a Front wheel bearing hub assembly or diagram


DUDE, GO TO AUTOZONE.....GET THE SHOP MANUAL...BUY IT, LOOK AT IT.....OR HAVE THE AUTOZONE PEOPLE PRINT YOU A DIAGRAM OF THE FRONT HUB ASSY.

Jul 29, 2014 | 1996 Ford F150 Regular Cab

1 Answer

Wheel hub assembly diagram


Go to you tube and ask for "How to replace Dodge Dakota front hub", you will find 2 or 3 good videos about it, I follow these videos and change mine in about 3 hours, note that I never did it in any car or truck. Another tip is that all videos I found was about 4x4 Dakotas and mine is 4x2, the only difference is the hub center fix, 28 mm screw on 4x2 and 32 mm nut on 4x4.

Apr 22, 2014 | 1989 Dodge Dakota 2WD

1 Answer

2004 F-150 4X4 XLT EXT CAB 5.4L NEED FRONT WHEEL HUB ASSEMBLY DIAGRAM


  1. n0051415.gif
  1. Item
Part Number Description 1 W706540-S900 Axle-to-wheel hub nut (4x4 only)
Removal Note 2 - Wheel speed sensor harness connector
Removal Note 3 2027 Anchor plate bolt (2 required) 4 - Brake caliper, pads and anchor plate
Removal Note 5 1125 Brake disc 6 1107 Wheel hub-to-wheel knuckle bolts 7 1104 Wheel bearing and hub assembly
Removal Note 8 N642567-S36 Tie-rod end-to-wheel knuckle nut 9 W707254-S427 Lower ball joint-to-wheel knuckle nut 10 W520215-S427 Upper ball joint-to-wheel knuckle nut 11 3K185 Wheel knuckle
Installation Note 12 W710279 Integrated wheel and bolt (3 required)


Mar 07, 2011 | 2004 Ford F150

1 Answer

Left front wheel bearing replacement diagram


Removal & Installation Front To Remove:
The front wheel bearings are not serviced separately. If the front wheel bearings are defective, the hub and bearing assembly must be replaced.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Lubricate the threads on the halfshaft with clean engine oil.
  3. Remove or disconnect the following:
    • Front wheels
    • Halfshaft hub nut
    • Caliper from the steering knuckle WARNING
      DO NOT allow the brake hose to support the weight of the caliper.
    • Brake rotor
    • Anti-lock Brake System (ABS) sensor from the backing plate
    • Hub and bearing assembly from the backing plate
    • Hub and bearing assembly from the halfshaft
    • Hub and bearing assembly
To Install:
Exploded view of the front hub mounting and related components 7922xg36.gif

  1. Install or connect the following:
    • Hub and bearing assembly onto the halfshaft
    • Hub and bearing assembly to the backing plate. Torque the 3 bolts alternately and evenly to 70 ft. lbs. (95 Nm).
    • ABS sensor
    • Brake rotor
    • Caliper on the steering knuckle.
    • Halfshaft nut. Torque it to 118 ft. lbs. (160 Nm).
    • Front wheel. Torque the nuts to 100 ft. lbs. (140 Nm).

Oct 18, 2010 | 2001 Oldsmobile Aurora

1 Answer

How do u replace a front wheel bearing on a 2005 gmc envoy 4x4 and dose anybody have diagrams to follow how to


Remove center hub cap. Remove large nut behind hub cap.Lift wheel assembly off ground. Remove wheel. Remove brake calipher assembly by taking out larger bolts from back of calipher. Remove brake rotor. Pull axle toward middle of vehicle, you may have to tap axle end with small hammer being careful not to damage threads on end of axle. Remove three bolts from back, bearing housing should come out to the front.

Jul 12, 2010 | 2005 GMC Envoy

1 Answer

I need a diagram on front hub and brake assembly for 1999 dodge 1 ton dually 2 wheel drive. the front brake rotor is warped i need to replace it


8–Stud Rotor
  1. Raise and support the vehicle.
  2. Remove the wheel.
  3. Remove the hub extension.
  4. Remove the brake caliper assembly.
  5. Remove the axle nut cotter pin. Remove the axle nut.
  6. Disconnect the ABS wheel speed sensor wire from under the hood. Remove the sensor wire from the frame and steering knuckle, if equipped.
  7. Back off the hub/bearing mounting bolts 1/4 inch each. Then tap the bolts with a hammer to loosen the hub/bearing mounting bolts.
  8. Remove the bolts and remove the hub/bearing assembly.

Sep 16, 2009 | 2000 Dodge Ram 3500

1 Answer

2005 ford escape assembly diagram for the front axle


If they are sealed bearings, you will need a press to get them out. If they are bolt in, just remove the brake pads/rotors, then the axle nut, then the bolts holding the wheel bearing in. Install in reverse order.

Mar 07, 2009 | 2005 Ford Escape

1 Answer

Bent drivers side front wheel assembly.


A diagram of what?
If your wheel is bent you have to replace the rim. I don't think there is anybody who straightens wheels anymore. If it's a factory wheel, you can pick one up at a salvage yard for a fraction of the price of a new one..

Jan 19, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

7,080 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...