Question about 2000 Chevrolet Silverado 2500
Third brake light doesn't work. The wire has power.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
When my blazer did this they had to replace part of the wiring harness in the steering wheel. It took forever for them to get the parts because we live in nowhereville, but once it was in it works again and no problems. I had to take it to the actual chevy dealer because none of the other places had a clue. good luck.
Posted on Jul 31, 2008
If you are sure the fuel pump relay is working, check continuity from the pump to the relay socket. These wires love to corrode. When you turn your ignition on, the fuel pump will only run for a couple seconds before it shuts off via the automatic shutdown relay. Make sure you are checking power within this window. The PCM (powertrain control module) is what completes the ground in order for the relay to send power to the pump. If the PCM does not recieve a signal from several sensors (mainly the Crank Sensor) it will not turn on the pump. You may want to check these sensors, is the check engine light on? You can scan it to see if any sensors have thrown a code. Be sure all applicable fuses are ok, the PCM may have its own fuse, check that even if the fuel pump fuse is ok. Your Truck may also have an inertia switch for the fuel pump which shuts it off during an accident. Check that as well.
Posted on Mar 20, 2009
check power steering fluid. first. if all good . power steering is going. your hydro boost brake system depends on the power steering pump if it goes out your brake go out.
Posted on Mar 29, 2009
check fuse under hood, batery terminals coroded wire at harness if everything fails run a hot wire to rear brake line with an interuptor.
check the swich under the foot brake.
Posted on Sep 09, 2009
Tips for a great answer:
Oct 12, 2012 | Cars & Trucks
Apr 21, 2012 | 2006 Chevrolet Silverado 2500HD 2WD
Feb 06, 2012 | 2000 Chevrolet Silverado 2500
Jul 08, 2011 | Chevrolet 2500 Cars & Trucks
Jan 11, 2010 | 2005 Chevrolet Silverado 2500HD 2WD
Sep 23, 2009 | 2003 Chevrolet Silverado 2500HD
Sep 16, 2009 | 1999 Chevrolet Silverado 1500
Feb 01, 2009 | 2003 Chevrolet Silverado Ss
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: