Question about Rolls Royce Phantom

Open Question

How to reset rolls phantom 2004 tire monitor

Put oversize wheels and was told it was easy to reset tire pressure montitor

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 93 Answers

SOURCE: Nissan 2007 Frontier tire pressure monitoring system

You need to set all the pressures to 35 psi. first then drive for approx.1/4 mile. If this doesn't work to reset the light (keep in mind the code itself will still be stored even though the light goes off) you will need to take it to your Nissan Dealer to have it scanned as there may be a malfunction with the sensor. If faulty and you are under 36k miles then it should be covered under your factory warranty. Hope this helps.

Posted on Oct 17, 2008

  • 111 Answers

SOURCE: low tire pressure light is on all tire pressure is

Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.

Posted on Feb 28, 2009

  • 574 Answers

SOURCE: 2004 Chevrolet Impala tire pressure light guage

1. turn the ifnition to ACC or ON and turn the radio off
2. press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed
3. press the SEEK up or down arrow to scroll through the main menu
4. Scroll until TIRE MON appears on the display the PREV or NEXT button to enter the submenu. RESET will be displayed.
6. press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
7.Once the monitor has been reset, scroll until EXIT appears on the display
8.Press the DISP button to exit programming. A chime will be heard to verify exit.
The system completes the calibration process during driving
This only works if you have a RDS system on the radio.

Posted on Aug 24, 2009

  • 986 Answers

SOURCE: just bought 08 wrangler unlimited ,with oversized

yes I have a few questions for you and you didnt pay for the fixya service. you can call me at 408-568-2963 or email me at There are many issues with the lifts on these JKs I have a 08 Rubi. I can help. Roger

Posted on Oct 06, 2009

  • 3854 Answers

SOURCE: How to turn tire pressure light off.

Shouldn't really be necessary to do anything to reset it if the system is operating properly.

"The system will automatically update and the TPM warning lamp will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information."

"A system fault can occur by any of the following scenarios:
1) Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
2) Installing some form of aftermarket window tinting that affects radio wave signals.
3) Lots of snow or ice around the wheels or wheel housings.
4) Using tire chains on the vehicle.
5) Using wheels/tires not equipped with TPM sensors."

Also, if you have the premium TPM system, the spare tire being low could trigger it, or with either the base or premium system, if you have a flat and change to a spare, the original flat tire could keep it from re-setting. And of course, a faulty sensor could be the problem.

There is a re-setting tool, but that should only be needed if the tire positions are changed (like if you rotate your tires), and that's only so that it can accurately tell you which tire is low, as opposed to turning off a warning light.

Good luck and thank you for using Fixya.

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Go to tire pressure and press reset on the status:tpm active

May 21, 2013 | 2007 Rolls Royce Rolls Royce Phantom

2 Answers


Touaregs have a learn mode that you access through the instrument cluster. You use the buttons on the steering wheel to navigate to it. Once you turn on the learn mode, you have to drive it quite a while for the light to go off, approx 20 minutes. The light will either go off, or the cluster will give you a fault message.

Feb 08, 2011 | 2004 Volkswagen Touareg

1 Answer

I put 26in rims on my 2008 sierra 1500 and the service tire monitor system came on. how do i turn this off?

Depending on what type of monitor it has its could be an easy fix. If they use a band type monitor that wraps around your wheel just have your tire shop pull the monitors off all your wheels and put all four of them on your spare. Given, you'll never know when your tires are low via dash light but we all managed to do without that for years anyway. On the plus side you'll be POSITIVE on the pressure of your spare.

Jun 03, 2010 | 2008 Chevrolet Silverado 1500

2 Answers

I just came back from Toyota with the same problem!

There are two different types of TPMS systems on Highlanders. One using battery powered sensors in the wheels, and one using ABS monitoring.
Some models actually use both systems as well.
For the record, a 2005 should only have the ABS monitoring TPMS system, not sensors.

If you have a reset button under your steering column, you have the ABS monitoring system.
If your valve stems are metal, you also have the sensor based system.
If your valve stems are rubber, you do not have the sensor system, and as such the spare is not monitored.

A sensor fault (dead battery, erroneous reading, etc) on the sensor system will result in a FLASHING TPMS light, not just lit.

A lit TPMS light on either system indicates a low pressure problem.


The absolute biggest issue I have seen with the reset button system causing recurring lights is improper reset technique.
When you reset your tire pressure, you need to run the reset button TWO times times to clear the system and not cause a recurrence in the next day or so.

The reason is this:
When your light comes on, indicating a low tire, you go fill all your tires up.
Then you push the reset button, making the light go out......this tells the system "Tires are aired up to whatever the old pressure was, turn the light out!." If they are not aired up exactly as whatever value they were set to XX days/months/however long ago when it was reset right, you have a problem!

Now you should push the button a SECOND time, the light will come on, flash several times then go out... This tells the system "OK, from now on, THIS is the correct pressure to look for, not the old pressure!"

It will now use that value as the correct "pressure" (ABS rolling diameter) to verify tire pressure condition.

Sep 12, 2009 | 2004 Toyota Highlander

1 Answer

2004 Tahoe- Check Tire System Monitor- RRRing vibration/noise

chevrolet uses tire pressure sensors for the system, check the tire pressure in all tires including spare and they should be set to about 38psi. If any of the tires are low it will trigger the abs because the abs system goes off wheel speed and a low tire will throw off the reading.

Jun 22, 2009 | 2004 Chevrolet Tahoe

1 Answer

Need to know how to reset the low pressure tire warning light

If your vehicle has similar controls like my 2006 Sequia. put the ignition in the ON position... then press the Tire Pressure Monitor Reset button (it is located on the dashboard button right beneath the streering wheel column).. press it for 4 to 5 seconds till you see the pressure monitor light come on and then go off. That should reset the system.

May 10, 2009 | 2006 Toyota Sequoia

2 Answers

Audi A8L '04 - tire pressure system problem

The system has to be reset from the MMI under tire pressure monitoring using th changewheel option

Feb 16, 2009 | 2004 Audi A8

4 Answers

Reset tire th

It's also a good idea to reset the tire pressure sensors when you air up the tires. If I remember correctly, you click the odometer/trip meter switch until it flashes TIRE RESET (or something similar) then press the button and hold it for a few seconds. That way it sets itself to the pressure in the tires at the moment, and if it notices a pressure drop it puts up a warning.

Sep 01, 2008 | 2005 Ford Freestar

2 Answers

2004 toyota solara

(!) is the tire pressure indicator. Generally means one or more tires is significantly below the set tire pressure. The indicator on my 2004 Solara comes on and goes off all the time even though the tire pressure is the same on all four tires and I have reset the indicator.

Check the pressure on your tires and if they are all at the recommended pressure turn your ignition on and hold the tire pressure reset button in until the (!) blinks 3 times. That will set the pressure. The button is on the lower part of the dash to the left of the steering wheel.

Aug 23, 2008 | 2004 Toyota Solara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rolls Royce Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76109 Answers


Level 3 Expert

902 Answers

Are you a Rolls Royce Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides