Question about 1996 Chrysler Concorde

Open Question

How to replace a radiator in a 1996 chrysler concorde

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 85 Answers

SOURCE: Overheating

did you bleed the cooling system? check the fans?

Posted on Jul 02, 2008

Ad
  • 16 Answers

SOURCE: how to replace a radiator in a chrysler concorde 1998 3.2

Disconnect negative battery cable.
Drain cooling system.
Disconnect upper radiator hose.
Remove upper radiator closure panels.
Disconnect electrical connectors from electric fans.
Remove all mounting bolts for electric fans then remove from vehicle.
Raise vehicle. (You might not have to, but its easier)
Remove lower splash shield.
Disconnect lower radiator hose.
Remove lower condenser mounting bolts.
Lower vehicle.
Now back to the top.
Remove upper radiator mounting brackets and bolts.
Remove upper condenser bolts.
Now separate condenser from radiator.
Tilt radiator toward the engine and remove it from the vehicle.

Hope this helps





Posted on Dec 06, 2008

jgwhomeequip
  • 1902 Answers

SOURCE: DHOW TO CHANGE OUT HEADLIGHT BULB ON 1996 CHRYSLER CONCORD LXI

For the bulb removal follow these steps.
-Open the hood and look behind the headlamp assembly with the burned out bulb.
-You'll see a black plastic ring about 2 inches in diameter, rotate this a quarter turn.
-Unplug the bulb, gently pulling the clip up to release the bulb.

Posted on Feb 05, 2009

csmock132
  • 4669 Answers

SOURCE: replace the engine motor mounts and the transmission mount. Would like to know how to do it. Thanks.

Check the frame mounts too. You will have to loosen the bolts and jack the motor up with a jack and a woodblock.

Posted on May 04, 2009

  • 7353 Answers

SOURCE: water pump location on 1996 chrysler concorde 3.5

under the timing belt cover, replace the timng belt when you replace water pump.

Posted on Oct 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace radiator on a 2004 chrysler concord 3.5 engine


Remove the 10mm bolts from the fan blade & remove it. Now you have room to work. Next drain the radiator & disconnect hoses. The small bottom ones are the transmission cooler hoses, plug them. Next remove the 2 top retainer brackets. You should now be able to pull it out.

Aug 05, 2015 | 2004 Chrysler Concorde

1 Answer

Rack and pinion 1996 Chrysler concorde


Yes, I think it has one. If the question is how to replace, its a simple r+r, but then you must bleed the rack with weight off the front wheels.

Dec 17, 2014 | 1996 Chrysler Concorde

1 Answer

No spark signal from pcm


Yepp welcome the 1996 Concorde your PCM is replacement is DUE! you can pick one up here --> http://www.solopcms.com/products/chrysler/concorde

Nov 11, 2013 | 1996 Chrysler Concorde

1 Answer

The oil cap turns and clicks, how does it come off without just leaving the seal underneath? 1996 concorde, chrysler car


Try pushing down the cap while turning it just like a prescription bottle if it comes off and the seal is still onside you need to replace the cap it is broken

Sep 14, 2011 | 1996 Chrysler Concorde

1 Answer

Air pocket in radiator


Remove the radiator cap (the pressure cap, not the overflow tank cap) and run the engine for about 15 minutes, or about five minutes after it reaches normal temperature. This should "burp" the air out of the cooling system.

Nov 15, 2010 | 1996 Chrysler Concorde

1 Answer

1998 chrysler concorde fuse under the hood for the radiator fan to work keeps blowing out


The radiator fan has a short in it,and it is going out,replace the fan motor.

Aug 15, 2010 | 1998 Chrysler Concorde

1 Answer

Oil is smoking near dip stick,won't go over 10 mph, now won't even start.It had been overheating for a while we filled it up with anti freeze 50/50 then the oil started smoking. 1996 chrysler concorde.


you did put the antifreeze mix in the radiator and not in the oil cap didnt you?

Sounds like you put the water where the oil goes!

you may have a jammed thermostat if you didnt do this, or badly out of whack ignition timing.

Jan 13, 2010 | 1996 Chrysler Concorde

2 Answers

Water pump location on 1996 chrysler concorde 3.5 mfi engine


On the 3.5 litre engine for this model, the water pump is located behind a large cover that is bolted on the front of the engine directy opposite of the fan. The pump is not visible or accessable unless that cover is removed.

Oct 21, 2009 | 1996 Chrysler Concorde

1 Answer

Over heats and engine dies, no thrmostat in system


have the radiator cleaned or replaced and have engine checked if cylinder heads are not causing the over heating

Aug 07, 2009 | 1996 Chrysler Concorde

1 Answer

Replace the engine motor mounts and the transmission mount. Would like to know how to do it. Thanks.


Check the frame mounts too. You will have to loosen the bolts and jack the motor up with a jack and a woodblock.

May 04, 2009 | 1996 Chrysler Concorde

Not finding what you are looking for?
1996 Chrysler Concorde Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...