Question about Chrysler Town & Country
Van starts and drives but does not appear to shift into higher gears
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: P0700, P0750 and P0755 codes
Trouble Code: P0750
A/T Low/Reverse Solenoid Circuit Failure
L/R solenoid control circuit is open or shorted to ground L/R solenoid control circuit is shorted to system power L/R Solenoid is damaged or has failed TCM or PCM has failed
Trouble Code: P0755
A/T 2/4 Solenoid Circuit Failure
2/4 Solenoid control circuit is open or shorted to ground 2/4 Solenoid control circuit is shorted to system power 2/4 Solenoid is damaged or has failed TCM or PCM has failed
Trouble Code: P0700
Automatic Transmission Control System Malfunction
The presence of this code means the TCM detected a problem TCM related Sensor has solenoid is damaged or has failed This code is for information only - check for other TCM codes TCM or PCM has failed
Posted on Oct 14, 2009
Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.
Posted on Jan 08, 2009
transmission speed sensor needs replacing about 40.oo$ at the dealer sits on the right side of transmission looking from the front of the radiator g s.
Posted on Jun 07, 2009
speed sensor most likely this transmission runs 2 an input and an output. if your speedometer is fluctuating or not working it would be output problem if not probably an input speed sensor. these sensors can be purchased for around 40$ i believe at your local dodge/chrysler dealer.
replacement is fairly easy. open hood remove air cleaner locate the sensor on the transmission. in put is closet to engine. unplug sensor remove by unscrewing it. reverse for installation. disconnect battery for 2 min to clear codes and road test
Posted on Nov 21, 2009
Tips for a great answer:
Apr 23, 2015 | 2001 Chrysler Town & Country
Jan 29, 2015 | Daihatsu Cars & Trucks
Dec 04, 2014 | 2001 Dodge Grand Caravan
Jan 10, 2013 | Chrysler Town and Country Cars & Trucks
Nov 02, 2012 | 2001 Chrysler Town & Country
Sep 27, 2012 | 2004 Ford Econoline
Jun 28, 2017 | 1995 Nissan Quest
Sep 24, 2011 | 2004 Chrysler Voyager
Sep 06, 2011 | 2001 Chrysler Town & Country
May 03, 2011 | 1999 Dodge Ram
778 people viewed this question
Usually answered in minutes!