Question about 1991 Isuzu Rodeo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
well i got a salvaged ecm from a junkyard and put it in, still did'nt start. took alternator off to have it checked , it is fine. put it back in and now it starts and runs fine. check the alternator and the connections, i heard the alternator controls power after the initial ecm prime when it is turned on. i have no idea how true it is, but worth a shot. if you can find a cheap ecm for a junkyard (mine was 75 bucks) i would try that afterwords.
Posted on Mar 06, 2009
Remove belt, fan, fan shroud and fan bracket. Remove timing covers, timing belt and water pump. Replace timing belt and the hydraulic tensioner with new ones. I suggest you get a mechanic to do this as you can easly get it out of time. Not an easy job.
Posted on Jul 03, 2009
You have to both check and add fluid to these vehicles from underneath the vehicle. Find the transmission fluid pan and you will find two plugs. The lower plug will drain the pan and the upper one you can add fluid or check the fluid level. You will know that the level is correct when the plug is out and fluid barely leaks out of the hole. You don't want a lot coming out because you don't want to overfill. In order to get it into the hole you have to be some sort of tube to attach to the top of the bottle. They sell these types of tubes at your auto part store and they just screw on. It is very awkward, but you can actually put the bottle high enough to get the fluid in if you put it right to the left of the pan. The first time I did this on mine it was a pain but once you figure it out you will be good to go. Let me know if you have any other questions about your vehicle. Thanks for rating my response and for using FixYa!
Posted on Jul 19, 2009
last question as my back hurts from sitting on computer ,right first lift each wheel up and check the wires to the sensors on the wheels ,their is a metal ring with teeth on and what often happens is the wire breaks to the sensor or the metal ring comes loose on the shaft and just spins around .Try this first before you go to a garage who would weld the ring up and charge you for a new computer or something
Posted on Jun 03, 2010
Tips for a great answer:
Feb 29, 2012 | 2000 Isuzu Rodeo
May 09, 2011 | 1996 Isuzu Rodeo
Sep 08, 2010 | 1997 Isuzu Rodeo
Mar 12, 2010 | 1996 Isuzu Rodeo
Feb 21, 2010 | 2000 Isuzu Rodeo
Jan 28, 2010 | 1991 Isuzu Rodeo
Dec 23, 2009 | 1996 Isuzu Rodeo
Nov 29, 2009 | 1993 Isuzu Amigo
Jul 03, 2009 | 1996 Isuzu Rodeo
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: