Question about 2001 Hyundai Accent
Engine 1.6 automatic code p0441
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i just replaced the timing belt, and asked the garage to look at the transmission for me because i thought i was experiencing some subtle shifting problems. they told me the transmission looked fine, but i needed a new filter and fluid. the engine light didnt turn on til a couple weeks later tho. does this sound like a new filter and fluid would fix this problem?
Posted on Sep 09, 2008
Did u leave the gas cap loose at any point? this is a leak in the evaporative emission system, a loose or defective gas cap is the most common cause of this code.
Posted on Dec 09, 2008
Was It Starting Before?
Who Changed It?
If The Belt Broke And The Belt Was Just Put Back On Without It Being Put In (TDC) Top Dead Center The Car Will Not Run. Warning! Trying To Start It Over And Over Will Destroy The Engine.The Engine Works By Being (TDC) Top Dead Center The Timing Controls When The Cylinders Come To The Top. The cylinders Are Controlled By The Timing So When The Spark Plugs Try To Ignite. The Cylinders Are Not In Position And Thus Will Not Create Combustion For The Engine To Run.
Posted on Jan 23, 2009
SOURCE: what does code 1-p0650 mean?
P0650 Malfunction Indicator Lamp (MIL) Control Circuit Malfunction
Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.
Posted on May 10, 2009
Tips for a great answer:
Sep 04, 2016 | Hyundai Motor 1998 Accent
Jan 05, 2016 | Hyundai Cars & Trucks
Dec 29, 2015 | Hyundai Cars & Trucks
Sep 11, 2014 | Hyundai Motor 2004 Accent
Evaporative Emission Control System Incorrect Purge Flow
What does that mean?
This indicates that a part of the EVAP control system is no longer functioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is controlled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.
Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light.
A code P0441 could mean one or more of the following has happened:
With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
Jul 11, 2012 | Cars & Trucks
Oct 15, 2011 | 2006 Hyundai Sonata
Jul 13, 2011 | 2001 Hyundai Accent
Jan 10, 2010 | 2001 Hyundai Accent
Dec 09, 2008 | 2001 Hyundai Accent
Sep 14, 2008 | 2000 Hyundai Accent
310 people viewed this question
Usually answered in minutes!