Question about Dodge Grand Caravan
Blower motor. Resistor. Placement
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The blower motor resistor is located on the dash panel, on passenger compartment, right behind the glovebox. The resistor is mounted on a plate assembly that can be removed as shown on picture below:
Posted on Sep 04, 2009
the resistor is behind your glove box. open the box and push in the sides to release it and let it hang down...the resistor is right there. I didn't try to replace it, a friend did it, but the part was under $20.
Posted on Feb 01, 2009
Under hood up behind strut tower on firewall on passenger side. You'll see a connector attached to a 1-1/2"x 3" rectangular piece that is inserted inside firewall. Pull it to one side then pull out. You may have to play with it a bit, but it will come. Clips in behind it. If you buy the new one first, you'll see the clips that are on other side of firewall in hole.
Posted on Apr 28, 2009
it comes in from the fire wall on the passenger side under the hood.it will be held in with 2 rivets the new on should just snap in.pry the old one out ,it may break don't worry because the new one does not require any rivets. there should be 5 or 4 wires going to it!
Posted on May 15, 2009
Tips for a great answer:
Jan 28, 2013 | 2005 Dodge Grand Caravan
Aug 13, 2012 | 2005 Dodge Grand Caravan
Jun 08, 2011 | 2006 Dodge Grand Caravan
Jan 04, 2011 | 2004 Dodge Grand Caravan
Aug 31, 2010 | 1998 Dodge Grand Caravan
Jun 05, 2010 | 2001 Dodge Grand Caravan
Jan 01, 2010 | 2001 Dodge Grand Caravan
Sep 04, 2009 | 2000 Dodge Caravan
Aug 23, 2008 | 2005 Dodge Grand Caravan
677 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: