Question about 1992 Mazda Protege
Was running before I did a tune up
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
follow the top radiator hose to the engine remove the bolts on thermostat housing be carefull removing those bolt not to break them let me know pierre
Posted on Jan 22, 2009
SOURCE: Loosen belts on 01 mazda protoge
There should be a tensioner pully on your motor like in the middle some where it should move with a wrench on it and that keeps your belt tight. Do you have a one big belt or a couple of small ones?
Posted on May 10, 2009
read this article, it explains that you have plugged EGR gas passages, the valve is not the problem, but read the link.
Posted on May 14, 2009
It sounds like your idle air control valve could be going out on you. The extra stress from being in gear can cause the car to stall out if the IAC valve isn't opperating properly. The IAC is attached to the throttle body and is normally held on by two screws. IAC valves are relatively cheap from AutoZone and easy to replace. That would be my best guess based on your description. Good luck and let me know if you have any other questions. Thanks for an honest rating and for using FixYa!
Posted on May 24, 2009
Tips for a great answer:
Oct 20, 2012 | Cars & Trucks
Jun 03, 2012 | Cars & Trucks
Apr 04, 2011 | 1992 Mazda Protege
Jul 20, 2010 | 1992 Mazda MX-3
May 14, 2009 | 1999 Mazda Protege
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: