Question about 1996 Ford Explorer
You will have to pinpoint what the engine is missing...
All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.
Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Posted on Feb 22, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If it has RWAL only, the sensor is in the rear end. If it is ABS brakes, there are speed sensors on the front wheels as well. If there is in fact a speed sensor in the tranny, it is most likely internal.
Posted on May 30, 2009
The ABS light is for the Anti-lock Braking System. The MIL will illuminate if there is a difference in wheel speed sensors signals to the PCM. So you might have a wheel speed sensor that is going out on you. Does the light come on at low speeds, or just higway speeds? You could take the vehicle to a local parts store and have them pull the codes for you and that will tell you which speed sensor is out of whack. Also road grime, dirt and gunk buildup can cause speed sensors to give false readings. Hope tihs helps you out.......
Posted on Oct 22, 2009
SOURCE: 2007 FORD EXPLORER XLT
need to set tires at correct pressure you can find a sticker on the inside of drivers door to tell you the correct pressure after you do that it sould reset the light after you drive
Posted on Feb 02, 2010
Tips for a great answer:
Dec 25, 2015 | Ford Cars & Trucks
Aug 09, 2014 | 1996 Ford Explorer
Dec 30, 2012 | 1996 Ford Explorer
Feb 16, 2011 | 1996 Ford Explorer
Oct 14, 2010 | 1999 Ford Explorer
May 18, 2010 | 1997 Ford Explorer AWD
Mar 10, 2010 | 1996 Ford Explorer
Nov 10, 2009 | 1996 Ford Explorer
Dec 11, 2016 | 1996 Ford Explorer
129 people viewed this question
Usually answered in minutes!