Question about Cars & Trucks

Open Question

Cant find location of front wipers fuse on Nissan Almera Tino 2000

The fuse for rear wipers are marked on the fuse box,but not for the front wipers? No power at the front wiper motor coming through. I tried to check the fuse but it is not marked on the fuse box if there is no fuse,it has to have a relay[not showing in the handbook] or could it be that everything is controlled by the column switch.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 113 Answers

SOURCE: BMW 740IL Wiper Issue

try checking for a short to power on ur 12 volt comming into motor also check for a good ground at the plug for ur wiper motor

Posted on Jun 17, 2008

picatudo
  • 239 Answers

SOURCE: 2000 Jeep Cherokee Sport, window washing does not work

the little pump inside the washer fluid reservoir is bad, replace it

Posted on Dec 28, 2008

  • 1 Answer

SOURCE: Windshield Wiper Not Working Properly

Well sure enough all I had to do was replace the circuit board...wish I had done this a couple months ago...it was so easy to do and will now be much easier to drive with being able to see clearly again....

Posted on Jan 08, 2009

dddsouve
  • 64 Answers

SOURCE: windshield wipers in front wont work but rear wipers work

Hi! U need to check the switch and the wiring circuit that controls the motor.

Posted on Jan 15, 2009

localwonder
  • 6784 Answers

SOURCE: Windshield wipers don't work

Ok, this is a steering column issue. The wiring needs to be replaced. Shouldn't cost much at all. also, the external switch may have issues as well but, i suggest you re wire your steering column to fix this problem.

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ivg got a 2005 Nissan Almera Tino 1800 petrol Ive got a problem still, I cant find an OBD reader that works with it,


check fuses and relays --check for power[ fuse ] to the port on quit a few vehicles usually the accessory fuse and obdll port are same ==the following link shows what pins to check with a meter if you have power to the port then start checking your harness,connections and computers
OBDII On Board Diagnostic System Does My Car Have OBD II The Connector...

Sep 11, 2016 | 2005 Nissan Almera Tino

1 Answer

Where is the petrol filter on a 2002 Nissan Almera?


look in the engine bay against the firewall to the right under below air filter box to throttle pipe usually cylindrical shape made of metal silver or black in colour

Feb 22, 2016 | 2001 Nissan Almera Tino

1 Answer

Location of nissan almera tino crankshaft sensor


if you are under the car it should be on the firewall side. It is black piece or a light grey color.

Jan 08, 2016 | Nissan Cars & Trucks

1 Answer

I have tried to locate the TCM on a nissan liberty 2002 but cannot find it


ECM and TCM are both located under the dashboard, behind the glove box. You must remove the glovebox to access these modules. Remember that any yellow wires or connectors are for the air bags. You should probably refer to a service manual before accessing anything electrical/electronic.

Jun 08, 2014 | 2004 Nissan Nissan almera tino

1 Answer

Failed emissions test nissan tino


Mine just failed emissions test garage said its burning oil what is the soulution

Apr 19, 2012 | 2004 Nissan Nissan almera tino

1 Answer

I have a nissan almera 2001 1500 what model


hi i am not 100% sure but i think it is the P11 144 gearbox its used with the almera qg15de engine. i think it is also used in a primera and almera tino of the same years.

Jan 24, 2010 | 2004 Nissan Titan

1 Answer

Nissan Almera Tino Diesel 2.1 - Temperature control not working


Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.

Jun 03, 2009 | 2000 Nissan Maxima

1 Answer

Nissan Almera Tino Right hand side


YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX

May 20, 2008 | 2006 Nissan Z

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...