Question about Cars & Trucks

Open Question

01 Ford E250 4.2 V6 no spark at cylinders 3 and 5 on coil

New coil but no spark on none shared one side of paired cyliders

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: 2001 hyundai santa fe 6

HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.

OK... I hope this solve your question .

THank you for use fixya.

Posted on Jul 25, 2008

motor1258
  • 6674 Answers

SOURCE: 2003 Ford Taurus spark plug diagram

Have a look here.

http://www.autozone.com/N,26200242/shopping/specsSelect.htm

Posted on Feb 02, 2009

  • 1 Answer

SOURCE: 99 cougar v6 P0352 misfire cylinder 3 and 4 replaced igntn coil..

Had the same problem, car was misfiring on cylinder 3 and 4. replaced wires, plugs, and ignition coil. still misfired on the same cynlinders. turned out the main engine wiring harness plug in was coming loose. spent well over $150 on the unneccesary repairs and ultimately fixed the problem wit a $3 bag of wire ties to hold the plug in...

Posted on Jun 01, 2009

ministock48
  • 258 Answers

SOURCE: Ignition coil pack on Ranger 1999 misfire on #3

replace coil

Posted on Oct 23, 2009

  • 819 Answers

SOURCE: I have a 2002 TrailBlazer with the straight

did you replace only one spark plug? that can cause issues because of differences in resistances between cylinders. also, did the map code stay off after replacing
?

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cylinder misfire coil


These engines have 3 coils and are paired 1 and 4 2 and 5 3 and 6 with a spark noid run to see if the paired cylinder has no spark if so remove coil from module and test the power supply to coil and with a logic probe test the trigger side if blinking with no spark your coil is bad. not blinking replace module.

Apr 17, 2014 | 1994 Buick Park Avenue

2 Answers

Cylinder 3 misfires


I would move no3 injector to another cylinder and see if the fault moved . If not the problem is in the injector wires or ECM plug If it moved I would consider a new injector .

Dec 29, 2013 | 2002 Ford Mustang

1 Answer

Firing order mitsubishi 3.5


Mitsubishi Montero 3.5 V-6n24 valve

Looking from the front of engine to the rear on the passenger side 1-3-5
Looking from the front of the engine to the rear on the drivers side 2-4-6


The engine has coil over plug with coils only on the drivers side. The spark is shared via spark plug cables to the plugs on the passenger side. So If you are replacing the spark plug cables:

#2 cyl.coil drivers side shares spark with #5 passenger side-
#4 coil drivers side shares spark with #1 passenger side-
#6 coil drivers side shares spark with #3 cylinder passenger side.

Mar 17, 2012 | Mitsubishi Diamante Cars & Trucks

2 Answers

Why isnt cylinder 1 and 5 firing on a 2003 ford mustang v6


First check for worn sparkplugs and if they still god then check for spark on those cylinders by pulling the sparkplug wire off and cranking the engine over.If there is no spark then replace the coil.If there is spark i would have the injectors leaned.

Jan 14, 2012 | 2003 Ford Mustang

1 Answer

Cylider head torque specs ford windstar 1996 3,8 cylider V6


Position the cylinder head on the cylinder block. Tighten the cylinder head bolts in 2 steps following the proper torque sequence. The first step is 37 ft. lbs. (50 Nm) and the second step is 68 ft. lbs. (92 Nm).


98c7056.gif

Oct 21, 2010 | 1996 Ford Windstar

2 Answers

Firing order diagram ford taurus v6 3.06 6 cylinder engine, and which one is the number 1


FIRING ORDER IS 1 4 2 5 3 6. STANDING IN FRONT OF CAR ON PASSENGER SIDE FIRST CYLINDER FRONT IS 1 2 3 ON DRIVER SIDE FIRST CYLINDER FACING YOU ARE 4 5 6 SEE 1 CYLINDER FACING YOU ON PASSENGER SIDE.GET A PIECE OF PAPER WRITE NUMBER ON TOP ACROSS LARGE NUMBERS 3 2 1 AND BOTTOM OF PAPER WRITE NUMBERS 4 6 5 THATS COILS WIRES FIRING ORDER TO SPARK PLUGS.

Sep 26, 2010 | 2000 Ford Taurus

2 Answers

1998 windstar 3 litre number 3 misfire ,changed plugs, wires, coil, injector, any ideas?the only codes are number three misfire


did you leave your battery hooked up while you were replacing the spark plugs and coil and such? try resetting your ECM.

Jan 15, 2010 | 1999 Ford Taurus

1 Answer

Im changing the wires on my f150 4.2L v6 2wd. now im not sure what order my wires went. i tried to do it one at a time. but i did sumthin wrong, cause when i got to the last wires i needed a small wire and...


The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

found this online hope it helps

Nov 07, 2009 | 1999 Ford F150 Regular Cab

2 Answers

The Spark Plugs are out of the correct order. What is the right firing order?


Ford settled on a single firing order for v6 engines covering many many years of vehicles: 1-4-2-5-3-6 The cylinder numbers are from the front of the engine left to right is 4-5-6 and the fire wall side is 1-2-3 The coil number from the front is 5-6-4 and to the fire wall side is 1-2-3. Good luck and hope this helps, keep me posted if you need more information, be glad to help

Jun 12, 2009 | 2006 Ford Freestar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...