Question about 1993 Mitsubishi Galant

Open Question

1993 galant won't start no spark - 1993 Mitsubishi Galant

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

GARYca
  • 672 Answers

SOURCE: I recently bought a 2nd

It is imperative to have a very experienced mechanic performs a timing belt service!! If not done correctly on this vehicle, severe engine damage may occur. I would recommend checking the cam position sensor, this controls spark!! If damaged or disconnected, you will experience a "NO START" condition!!

Posted on May 24, 2011

short shadey
  • 421 Answers

SOURCE: Galant won't turn over when

you now need to check for 12 volt power, and signal to the coil, also be sure all you timing marks are correct, if you have no spark, unplug one of the injectors and using an led test light check for injector pulse power across the two terninals while cranking, if you have no injector pulse then you could have a problem with the ignition passlock system, or key decoder

Posted on Jul 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Died as i was driving , won't start


Fuel filter,air filter,spark plugs,crankshaft sensor,any codes.

Feb 02, 2013 | 2006 Mitsubishi Galant ES

1 Answer

1993 camro no spark won't start


check the distributor cap and rotor. they may need to be replaced

Dec 03, 2012 | Cars & Trucks

1 Answer

1993 grand voyager won't start


anti theft malfunction. seriously put your ear near the filler neck uncapped and have someone turn the key. is there s whining. then that rules out a bad fuel pump> try carefully priming the injectors with fuel and then crank. standby with a garden hose in the even it backfires and pukes out the fuel. remove a plug wire and put any plug in the boot rest it against the valve cover have someone cranlk and looks for spark. 2 main causes for no start lack of fuel, lack of spark

Sep 04, 2012 | 1993 Plymouth Grand Voyager

1 Answer

1993 jeep cherokee won't start


MAKE SURE DISTRIBUTOR CAP ,ROTOR, SPARKPLUGS AND WIRES, OKAY IF ALL HAS BEEN REPLACED.IF NOT GETTING SPARK PROBLEM COULD BE IGNITION COIL FAULTY, ASD RELAY FAULTY,DISTRIBUTOR WITH CAMSHAFT SENSOR FAULTY OR YOU HAVE FAULTY PCM. CODE SCAN VECHICLE FOR FAULT CODE, IF YOU ARE GETTING SPARK PROBLEM IN THE FUEL SYSTEM, CHECK FUEL PUMP RELAY AND FUSE MAKE SURE FUEL FILTER BEEN CHANGED AND FUEL PRESSURE IS 39 - 41 PSI. CHECK FOR FUEL SPARK SEE WHAT GOING ON, VECHICLE NEEDS FUEL OR SPARK TO RUN IF ONE NOT WORKING ENGINE WILL NOT START.

Oct 31, 2011 | 1993 Jeep Grand Cherokee

1 Answer

Driving down the street stopped running. still turns over, but won't start. is there a inline fuel filter? and where is it located?


first you need to check for spark, then check if the timing belt is OK, it may have broken. It has a fuel filter, at the firewall, but thats not your problem.

Sep 22, 2011 | 1992 Mitsubishi Galant

1 Answer

Galant won't turn over when trying to start. No spark from plugs. Changed crank sensor and timing belt and still won't start. Any suggestions


you now need to check for 12 volt power, and signal to the coil, also be sure all you timing marks are correct, if you have no spark, unplug one of the injectors and using an led test light check for injector pulse power across the two terninals while cranking, if you have no injector pulse then you could have a problem with the ignition passlock system, or key decoder

Jul 31, 2011 | 2005 Mitsubishi Galant

1 Answer

I'm only getting spark out of one of the coil packs and the car turns over put won't start, please help me. Thank you


Try switching the ignition coil with the other coil and plug it in and check for spark again. If it works in the other coil location, then you need an ignition coil. Your engine is bad for valve cover gasket leaks which deteriorate the spark plug wires, so if you are going to put in plugs and wires with the new coil, I would recommend replacing the valve cover gasket and spark plug tube seals(included with the valve cover gasket set).

Jun 21, 2011 | 2000 Mitsubishi Galant

2 Answers

I recently bought a 2nd hand 2003 galant 2.0, after my mechanic replaced the timing belt, the engine won't start. There was no spark on the cables. What's wrong? Please help.


It is imperative to have a very experienced mechanic performs a timing belt service!! If not done correctly on this vehicle, severe engine damage may occur. I would recommend checking the cam position sensor, this controls spark!! If damaged or disconnected, you will experience a "NO START" condition!!

May 24, 2011 | 2002 Mitsubishi Galant

Not finding what you are looking for?
1993 Mitsubishi Galant Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...