Question about 1994 Ford Aspire

Open Question

Turn signals quit working on my 1994 ford aspire. where is the fuse located

4 way flashers work fine low hi beams ok. bulbs are ok. is there a relay or fuse

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Benimur
  • 6966 Answers

SOURCE: 1991 Ford E150 turn signals do not work,emergancy flashers flash constantlly unless the flasher relay is unplugged from fuse block

Hi,

If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.

Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 05, 2008

  • 1 Answer

SOURCE: 1988 Ford Taurus Turn Signals do not work

Yes, it certainly could be the switches in the windshield wiper stalk off of the steering column.
From day one, my (used 14K) 93 Taurus turn signals worked in some positions of the wiper speed and not in other positions of the wiper speed. Fortunately, they always work when the windshield wipers are off.

Posted on Dec 14, 2008

  • 1 Answer

SOURCE: Turn Signal Flasher location in 93 Mustang GT

The flasher is a small round plastic cylinder (unless replaced with a metal one) behind the left edge of the glove box that will look similar to the one in the fuse panel. The first step is to squeeze gently both sides of the open glove box and let it swing downward. It will be snapped into a metal horizontal brace just to the left of the glovebox opening by a small tab and have two wires attached. The number more than likely will be a #552 although I have seen a factory one with a Warner #224

Posted on May 13, 2009

  • 63 Answers

SOURCE: Turns signals do not work on 1992 Ford Thunderbird

I Have A 92 Thunderbird To And Its Located Above The Fuse Panel You Will Probally Need To Remove The Panel Under The Steering Column To Get To It Its Located To The Right of The Steering Column It looks Like A Relay Not The Normal Looking Round Style Flasher

Posted on Jul 16, 2009

localwonder
  • 6784 Answers

SOURCE: LOW BEAMS NOT WORKING 2002 FORD FOCUS

Hi. i recommend a thorough inspection of the wiring harness and harness connectors that led to the actual headlights. use a volt meter to test the current flow to the connectors. pull the connectors from the back side of the headlights and test all cooper contacts inside the connectors. If the wire contacts all show voltage, this will confirm a switch malfunction. it should be replaced in this case.

Now, if one or more contacts on the wires harness fail to produce any voltage, this will confirm a faulty wiring harness. replace the wiring harness in this case.

Make sure the headlight switch is in the on position when testing the wires.

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble shoot turn signals 1994 Ford Ranger 2.3 engine


Diane, There are 2 separate flashers on your vehicle, one is for the emergency/4 way lights and one flasher is for the signal lights. It may be worth the couple bucks and replacing the signal flasher as a first step. Recheck bulbs/sockets, fuses/relays, flasher. If all looks good possible signal switch is bad. Remove switch and try to clean contacts or replace switch. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://ca.answers.yahoo.com/question/index?qid=20090405174036AARb2Uc
1994 Ford Ranger Turn Signal Electrical Problem 1994 Ford Ranger
93 Ranger Turn Signal Problem Ford Truck Enthusiasts Forums

Aug 20, 2016 | 1994 Ford Ranger Supercab

1 Answer

Turn signal harness 2002 ford ranger 14a320 diagram turn signal connector wire colors and ppin location


images for Turn signal harness 2002 ford ranger

Ford explorer turn sinal problem got fixed - YouTube

? 3:23
www.youtube.com/watch?v=I2SUGIvYAWc
Jul 12, 2013 - Uploaded by Raybob216 My 04 exployer left turn signal and break light not working fix loose wires behind ... bulb and come to find out wire had popped out of the harness. ... How to Change Ford Explorer 2002 Flasher Relay for Hyper Flasher Relay ... How To Install Replace Turn Signal Wiper High Beam Switch Ford Ranger 95-98 ...

Oct 07, 2015 | Ford Cars & Trucks

2 Answers

My headlights will not turn on. my high beams and signal lights work though. i have checked all fuses and they seem fine. ?????


the headlight switch powers the relay that will power the bulbs your problem is either the switch or the relay locate headlight relay in fuse panne under hood use a testlight test if tyou have power at one terminal then turn on switch you should have power at another terminal if you have switch power replace relay if not check wires and connector at switch if ok replace switch


hope this helps plz vote and comment on answer if you have any more questions reply

Jan 17, 2011 | 1994 Ford Mustang

3 Answers

I have a 2000 ford explorer and both my 4 way flashers and turn signals are not working


check the fuses and both flasher cans,if not working then,u need to check the blinker switch

Dec 23, 2010 | 2000 Ford Explorer

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

Front driver turn signal quit. changed bulb, worked for short time, then quit. bulb OK. passenger side quit 1-2 months later. bulb OK. neither front emergency flasher work. automatic daytime front lights...


Check for head light (daytime)relay to be bad,this might have to do with the turn signals also,if the turn signals on this car,also have running lights in them,If this relay is not bad,replace the body control module.

Nov 07, 2009 | 2005 Pontiac Grand Prix

3 Answers

High-low beams not working


Check for headlight relay and fuse. Some cars have separate circuits for head light flasher and normal high/low beam. From your description, I would suspect a bad connection to/from relay or relay itself.

Jul 07, 2009 | 2006 Hyundai Accent

1 Answer

1997 Hyundai Accent is acting funny in the headlight department. At first my day-time running lights didn't work and low, high, and flashers were fine. Now, day-time running lights work, high beams work,...


There's only one relay, but two fuses, both located in the underhood fuse/relay box.

53ee18a.jpg Sounds like you have a wiring problem since sometime the left works and the right doesn't, then the right works then the left doesn't. Might be the multi-function switch on the steering column in combination with the connector M10-1, EM01, SE14 & 16.

Jun 26, 2009 | 1997 Hyundai Accent

1 Answer

2004 hyundai accent flasher problem


this sound like your flasher unit/relay is faulty as both indicators and 4 way hazard lights are not working chech your h/book for location or look under neath the fuse/relay box cover ?there is usually a diagram of location of fuses//relay

Nov 04, 2008 | 2004 Hyundai Elantra

Not finding what you are looking for?
1994 Ford Aspire Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...