Question about 1993 Oldsmobile Cutlass Ciera

2 Answers

Where do I install the electronic flasher relay for the turn signals?

I recently had a hitch installed and the turn signal flashers stopped working. I was told that the problem could be solved by installing a new electronic flasher relay. I don't know where the connection is for installing the relay.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If the turn lights come on and don't flash, like mine did, I found the flasher behind the ashtray.If you can't reach it,there are only 4 screws holding the bracket (1/4 in.nut driver) that holds the ashtray.

Posted on Dec 04, 2008

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

LOOK UNDER DRIVER SIDE OR PASSENGER SIDE DASH. TURN IGN. ON AND HAVE SOMEONE TO TURN SIGNAL ON MANUALLY UP AND DOWN. AND LISTEN FOR THE CLICK. HOPE THIS HELPS

Posted on Oct 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).


sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck

Jul 08, 2016 | 1997 Plymouth Voyager

1 Answer

1998 Toyota Avalon turn signals stopped working


Its either the flasher's, the turn signal lever switch or the hazard switch.
Try pulling one of the flashers out and see if the other system starts working.
Has anyone installed aftermarket electronics or tampered with the wiring in either system? Like an ALARM system? Stereo?

Jul 08, 2013 | Cars & Trucks

1 Answer

I need to know how to replace the electronic flasher for my turn signals on my 2001 grand am se. My turn signals only work a quarterof the time.


are you sure you don`t have a bulb filament that is making and breaking contact causing the flasher to intermittently work.assuming you mean they either stop flashing or flash faster than normal.when the flashers are working look under the dash and find the flasher unit with it operating.all you have to do is pull the flasher out of its location and install in reverse.i say check with the signals working because the hazard flasher looks the same but is a different unit.

Jun 09, 2011 | 2001 Pontiac Grand Am SE

2 Answers

Is there a fuse for the turn signals? hazards works ok but the turn signal only the light comes on.


Should be two flasher relays.Easiest way to find them is to turn flashers on and find where the clicking is coming from. They are usually within a few inches of each other.Once you find them both remove the one for the hazard flashers and install it in place of the one for turn signals.If this corrects your issue you will need to purchase another flasher relay.

Jul 20, 2010 | 1992 Dodge Dakota

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

2000 Intrepid turn signals stopped working, I replace the flasher relay, still turn signals not working?


did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong one.

Jun 25, 2009 | 2000 Dodge Intrepid

2 Answers

Turn Signals Malfunctioning


If your hazard lights work you need a turn signal switch, If hazards do not work replace the Flasher module

Jun 10, 2009 | 2004 Honda CR-V

1 Answer

Flasher relay won't stop


if you turn the signal off then the turn signal switch is bad

Mar 26, 2009 | 1998 GMC Jimmy

2 Answers

96 ford tarus turn signal


The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.

You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.

Nov 19, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

1,525 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...