Question about 1996 Pontiac Trans Sport

Open Question

Engine don`t start. Where is located crankshaft position sensor and fuel pummy engine 2.3L 16v Quad4 DOHC?p relay for

This engine was product only in 1995. 2.3L 16V Quad4 DOHC.

Posted by on

  • tamas adrian Feb 21, 2012

    FUEL PUMP RELAY....sorry for mistake!

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: update. 2000 pontiac grand am 3.4 liter engine,

Probably the fuel pump. It starts & runs until the pump gets hot, then when it quits, your car quits.

Posted on Apr 26, 2009

Ad
mechanicm639
  • 253 Answers

SOURCE: Crankshaft Position Sensor

The crank sensor is on the front of your engine behind the harmonic balancer. You will need a balancer puller for a 3.8 and a crank sensor alignment tool to do this lob.

Posted on Apr 30, 2009

greg_margo
  • 1959 Answers

SOURCE: Which transmission? 4T60E or Th125? auto, 16v quad 4, 2.3l. not sure about tranny?

I'm showing a 3T40 Auto Transaxle for a 2.3L engine and a 4T6E for a 2.4L engine Hope this clarifies your question. Good Luck!
Greg

Posted on May 15, 2009

roniecon
  • 6927 Answers

SOURCE: 96 grand am 2.4L DOHC, replaced the Crankshaft

Check the charging system13.65 volts,to 14.25 volts at the battery when running and lights and blower fan on high.Check the battery connections,that they are clean.The fuel pressure maybe low,check the fuel filter,and the fuel pressure to see if the fuel pump is weak.

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to find the location for my crankshaft position sensor on my 1999 Mitsubishi Diamante


Your 1999 Mitsubishi Diamante is a 3.5L MFI SOHC 6cyl engine.
MFI = multi-port fuel injection
SOHC = single overhead camshaft
This answer covers Mitsubishi Diamante1.8L, 2.4L, 3.0L (SOHC and DOHC), 3.5L, and 1997-2000 1.5L Engines.

2.4L engine shown, others similar.

Fig.1 - CKP position and its two mounting bolts
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-0.jpg

In Fig. 1, the two arrows point to the CKP (crankshaft position sensor) mounting bolts to remove. 2.4L engine shown.

Fig.2 - CKP reluctor removal
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-2.jpg
Remove the sensor and slide the reluctor wheel off of the crankshaft-2.4L engine shown.

1. Disconnect the negative battery cable.
2. Remove the timing belt.
3. Unplug the sensor connector.
4. Unfasten the two retaining bolts, then remove the CKP sensor from the vehicle.
5. Installation is the reverse of the removal procedure.

Reference: Autozone online repair guide: Mitsubishi Galant/Mirage/Diamante 1990-2000, at
www.autozone.com

Fig.3 - photo - new 99Diamante CKP, a Wells part #SU4313
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-5.jpg

Jul 31, 2016 | 1999 Mitsubishi Diamante

1 Answer

Where is the knock sensor on a Kia Sedona 2.9 diesel, 2004 LA


Hi,
Here is the location of the "Knock Sensor" you requested, I hope it helps you. It is Number 17. for future reference here is the list of the others
1 = Camshaft position sensor (CMP)
2 = Crankshaft position sensor (CKP)
3 = Engine Control relay (EC) -engine bay fusebox/relay plate 1
4 = Engine Coolant temperature sensor (ECT)
5 = Exhaust gas recirculation valve actuator (EGR)
6 = Fuel Filter
7 = Fuel Filter Heater - in fuel filter housing
8 = Fuel Flow control valve - on high pressure fuel pump
9 = Fuel Rail pressure sensor(FRP)
10 = Fuel Temperature sensor - on high pressure fuel pump
11 = Glow Plugs
12 = Glow Plug Relay 1 - engine bay fuse box/relay plate 2
13 = Glow Plug relay 2 - engine bay fuse box/relay plate 2
14 = High Pressure fuel pump
15 = Injectors
16 = Intake air temperature sensor (IAT) - in MAF sensor
17 = Knock Sensor (KS)
18 = Mass Air Flow sensor (MAF)

25399765-f5d0u4e2gjrctbiof2rrhyew-2-0.jpg

Feb 04, 2015 | 2004 Kia Sedona

2 Answers

I have a 2003 Saab 9-3 Turbo convertible, I have replaced the coil pack, the battery, starter, fuel pump, crankshaft position sensor, spark plugs & more, the engine cranks like nobodys busines


did you check for voltage at the coil pack low tension input
this comes from the electronic ignition and the distributer dc setting on a multimeter

check inside the distributer that the little magnet is still in place on the rotor and that the sensor is outputing pulses as it turns over
{you can use a meter set to AC range for this ...}
pull a plug out and place its metal to ground check for actual sparks
if this is there then its fuel ...

Dec 05, 2014 | 2003 Saab 9-3

2 Answers

Tying to find crank sensor for 2002 Cadillac Seville std 4.6 liter


This answer covers 1999-2005 Cadillac Deville, Eldorado & Seville.
Example Engine:
2002 Cadillac Seville STS 4.6L SFI DOHC HO 8cyl.

This engine has (2) Crankshaft Position (CKP) Sensors: the Upper sensor is CKP sensor B, and the lower sensor is CKP sensor A (this is included for the OBD-II DTC codes - P0385 references Sensor B = upper CKP sensor, whereas P0335 references the lower CKP sensor (sensor A)).

Both crankshaft position sensors are located in the front of the engine just above the oil filter adapter. To access both CKP sensors, jack up vehicle on the passenger side, remove the oil filter, and the oil filter adapter, including the Engine Oil Pressure (EOP) switch. See illustration.
tying-find-crank-sensor-2002-cadillac-3hcuyyaerdphtgzyedxwn2k0-1-0.jpg
The ARROW points toward Front of Car.
1. Upper Crankshaft Position Sensor (B).
2. Lower Crankshaft Position Sensor (A)
3. Engine Oil Pressure (EOP) switch
4. Engine Oil Level switch
The Oil Filter is the can-type object below the oil filter adapter, which includes the EOP switch. Recommend: remove oil filter with an oil filter socket/strap wrench, since it's close to the oil pan.

Aug 21, 2014 | Cars & Trucks

3 Answers

Where is the crank sensor on a 1994 ford taurus gl


What engine? 3.0 DOHC 3.0 OHV 3.8 liter

Apr 10, 2013 | 1994 Ford Taurus

2 Answers

I can't find the location of the crankshaft postion sensor in my 2000 Hyundai sonata


My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

Dec 29, 2010 | 2000 Hyundai Sonata

2 Answers

Location of cam and crank position sensors


The cam sensor is located at the front right front side of the cylinter head, while you are facing the engine.---------- The crank position sensor located below the pcv valve that is located on block not the valve cover, its below the exhaust manifold. You will have to remove the catalytic converter to see the exact view of both the sensors. The camshaft sensor is on the head. The crankshaft sensor is in the block, just below the exhaust manifold. ------------ Thanks.Helpmech.

Nov 12, 2010 | 2001 Ford Escort ZX2

1 Answer

1998 elantra was running fine and motor just died. Will turn over fine but will not start. I had filled up with fuel and driven about 50 miles when this happened.


Is the engine getting fuel and spark?

Try to put a few teaspoons of gas in the throttle body to see if it starts up. If it doesn't then the engine's spark plugs may not getting spark.

A possible coil may be the root of the above problem.

If it does start and run for a few seconds then the spark is good, but the fuel pump may not be pressurizing (bad fuel pump) or the fuel injectors are not firing (possible PCM or Powertrain Control Module).

A crankshaft position sensor can also cause a no start condition.
It is located near the Crankshaft of the engine.

---
Here's more information about the crankshaft position sensor which if bad, can cause a no start or no run condition.
Crankshaft Position Sensor Engine speed is a very important input to the Engine Management System (EMS). Crankshaft speed and position are the basis for many calculations made by the computer. Crankshaft position values are transmitted to the computer by pickup coils also known as Permanent Magnet (P/M) generators, hall-effect sensors or optical sensors. The Crankshaft Position Sensor (CKP) also known as engine speed sensor is located in close proximity to the crankshaft.
In addition, the EMS uses minute variations in the CKP sensor data to determine engine misfire. The EMS uses this information in conjunction with the camshaft position sensor to perform misfire diagnostics.
Related Symptoms No Start / Intermittent Start Condition – Can be caused by a faulty crankshaft position sensor due to loose connections, bad grounds, high resistance in the circuit, or opens in the circuit. (See also Engine Mechanical)
---
These are just a few possibilities, and if one takes it to the dealer to have the engine diagnosed, that might be a good place to continue of the above doesn't isolate the problem sufficiently for repair of the no start condition.

Aug 06, 2010 | 1998 Hyundai Elantra

2 Answers

Crankshaft position sensor


where it the crank potision sensor on a 92 mitsubishi diamante

Sep 15, 2009 | 1998 Mitsubishi Diamante

2 Answers

Fuel pump location and replacement


You are looking for the constant control relay module- ( CCRM ) see below. The pump will be located inside the fuel tank.Most of the time , its the pump and not the relay but, it wouldn't hurt to check the relay out. Teh relay is housed in the CCRM. Its located behind the engine coolant reservoir.


3dc24e5.jpg

Mar 20, 2009 | 2000 Ford Mustang

Not finding what you are looking for?
1996 Pontiac Trans Sport Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...