Question about 1994 Jeep Grand Cherokee
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have the owner's manual look up fuses in the index, good illustration. If you don't, I do. It shows a relay and a 15 amp fuse. Look at the passenger kick panel, pull the cover, and it is #2 fuse (second from the top on the left) The see the relay you may have to pull the panel (two screws and a clip) the relay is the third cavity down, third row from the firewal side.
Let me know if this works for you?
Posted on Apr 03, 2009
It's usually an issue with the relay which can be found one of two ways. You can either remove the front grille, bumper cover and support brackets under the cover, or you can remove the right headlamp assembly and smack a hole in the plastic underneath it with the ball side of a ball peen hammer. I start right in the middle of where the headlamp used to be and peek around to get a more accurate idea of where it is. Then I smack another hole directly above it and unbolt it from the frame. When you put the headlamp back in, it will cover the holes you just created as long as you don't get too hammer happy.
Posted on Apr 18, 2009
left rear of engine block,on transmission bell housing.best way from top under brake booster use a wrench,
Posted on Jun 13, 2009
pic REMOVAL - 4.7L
The Camshaft Position Sensor (CMP) on the 4.7L V–8 engine is bolted to the front/top of the right cylinder head (CMP Location—4.7L Engine).
It is easier to remove/install sensor from under vehicle.
Raise and support vehicle.
Disconnect electrical connector at CMP sensor (CMP Location—4.7L Engine).
Remove sensor mounting bolt (CMP Location—4.7L Engine).
Carefully twist sensor from cylinder head.
Check condition of sensor o-ring.
See picture for sensor location.
Posted on Jul 21, 2010
Testimonial: "that is just what i needed thanks"
Tips for a great answer:
Aug 15, 2014 | 1994 Jeep Grand Cherokee
Apr 25, 2014 | 1994 Jeep Grand Cherokee
Feb 01, 2014 | 1995 Jeep Grand Cherokee
Oct 21, 2013 | 1993 Jeep Grand Cherokee
Mar 05, 2011 | 1994 Jeep Grand Cherokee
Aug 22, 2010 | 2003 Jeep Grand Cherokee
Jun 02, 2017 | 1994 Jeep Grand Cherokee
Apr 28, 2010 | 1995 Jeep Grand Cherokee
Feb 22, 2010 | 1994 Jeep Grand Cherokee
Oct 07, 2009 | 1994 Jeep Grand Cherokee
306 people viewed this question
Usually answered in minutes!