Question about 1999 Buick Regal
Try using a white lithium grease and spraying down the upper strut mounts if it is the mounts that are making noise, some times its also the lower ball joints squeeking from a lack of grease normally because the ball joints are sealed and ungreasable
Posted on Feb 21, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Buick Regal brakes
Sometimes (when changing the brake calipers on disk brakes, or changing wheel cylinders on drum brake systems) the mechanic will clamp a vise grip pliers on the rubber hose to prevent hydraulic fluid from dripping out. This can break the internal fiber lining in the rubber hose. Then the fluid flow can be blocked. When you press the brake pedal, fluid may not flow to the wheel or wheels. As you press harder, the fluid may suddenly flow through the line, causing the brakes to suddenly activate.
Or an even more likely problem, your brakes drag (stay on) and get hot, because the fluid cannot flow back to the master cylinder when you release the brake pedal. In other words, when you press the brake you force fluid through a partially blocked rubber hose. But the return of the fluid (backwards through the rubber hose) is caused not by pressure, but just by equilibrium, a balancing act. Well, if the line (rubber hose) is blocked, the fluid stays in the caliper or wheel cylinder, and the brake is still on, and the brake gets hot.
Ken Camas, Washington email@example.com
Posted on Dec 28, 2008
Here is a link describing your strut replacement. Autozone also has free tool rental for the strut spring compressor if you need it. Thank you, and don't forget to vote. http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800681ba
Posted on Jan 29, 2009
I had the same problem with my 95 Lesabre. The owners manual says to take the key out, and wait 3 minutes(until the light goes off). It should fire right up.
Posted on Feb 26, 2009
SOURCE: signal bulb on 2003 buick regal
To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.
Posted on May 07, 2009
Tips for a great answer:
Nov 20, 2010 | 1995 Buick Regal
Sep 24, 2010 | 1995 Buick Regal
Sep 09, 2010 | 1999 Buick Regal
Mar 27, 2010 | 1999 Buick Regal
Jan 20, 2010 | 1998 Buick Regal
Oct 17, 2009 | 1999 Buick Regal
Jul 19, 2009 | 2002 Buick Regal
Jan 29, 2009 | 1999 Buick Regal
Jan 13, 2009 | 1999 Buick Regal
181 people viewed this question
Usually answered in minutes!