Question about 1999 Lincoln Town Car
Yes. The DEFAULT is on. If you turn it off, it will turn back on if you turn the ignition switch off and back on again. The only reason you would want it off is if you are towing a trailer. In this case, you must turn it off each time you turn the ignition switch on to prevent transmission damage.
The only other time you would want to turn it off (towing or not towing) is if you are climbing a LONG STEEP hill - like in the mountains, and the transmission is shifting in and out of overdrive continuously.
Posted on Feb 22, 2012
Testimonial: "thank you for the info"
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If there is no difference in the ride height then you could have a leak which is under control. There is also an inertia switch next to the air suspension switch. Make sure you are using the correct button. When air bleeds out of a suspension bag things can get weird. There is a diagnostic plug which dealers have testers for. Autozone or Murrays may also have testers for this part.
Posted on May 02, 2009
The inertia switch should be located in the trunk, on the right-hand side, behind the feltlike trim material.
Posted on Jul 09, 2009
Is there a clicking sound coming from the center of the dash at the bottom of the windshield? If so, it is the blend door motor which changes from heat to a/c. It requires the removal of the dash to replace it, It could be a vacuum leak under the center of the dash above the floor hump
Posted on Oct 11, 2009
Tips for a great answer:
Jan 09, 2014 | 2001 Lincoln Town Car
Jul 23, 2011 | 1999 Lincoln Town Car
Jun 29, 2010 | 2002 Lincoln Town Car
Sep 23, 2009 | Lincoln Continental Cars & Trucks
Jul 17, 2009 | 2004 Lincoln Town Car
263 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: