Question about Cars & Trucks

Open Question

Gemel serpi star e733 not working

The car has had the battery removed for 4 weeks when refitted immobiliser does not work

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Battery Drain in 4 days

In my case, the problem turned out to be the after-market radio which is on the same circuit as the interior lights and clock. Once it was changed, the problem was solved.

Posted on Feb 01, 2009

  • 2030 Answers

SOURCE: kia carens 2000 diesel immobiliser problem

The mechanic that you talked to was exactly right

Posted on Jan 30, 2010

  • 22326 Answers

SOURCE: need to reset audi 1996 alarm but key immobiliser dont work

if factory immobilisor then its a dealer only job but i suspect a seperate remote start alarm and this could be faulty and will require removing completely

Posted on Feb 18, 2012

  • 22326 Answers

SOURCE: daewoo nubira immobiliser wand not working

Breakdown truck and dealer only to sort it out ,sorry no quick fix or it wouldnt be a immobilisor would it

Posted on Mar 05, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to locate safty switches on kobota model #ch 640 s?

Sounds as though it could be an immobiliser problem and these days on older vehicles the immobiliser is such a common cause of problems of this type it is hardly worth checking anything else.

I still advocate checking the fuses and ignition switch operation, removing and refitting the relays and giving each a tap with a screwdriver handle and having a good visual check of whatever can be accessed easily.
It isn't easy to do any more without a wiring diagram, a couple of hours to spare and some know-how. In my experience most often after all that the experts still must be called in to deal with a rogue immobiliser.

I have known some cars where the immobiliser number can be entered via the driver's door lock or the throttle pedal. I have known another older car where disconnecting the battery overnight assured a successful start the next morning and yet another where the immobiliser could be by-passed with a jumper lead from the battery direct into engine management. These days it is the main ECU that tends to be coded.

Feb 28, 2015 | Cars & Trucks

1 Answer

I have a versa 2011 it has a problem in some electric it is that the place in speedometer where it shows the milege there writes a message saying loose plz what does this mean

try disconnecting the battery negative terminal for 20 min then carefully refit. Do not leave your keys in the car!
If this ecu reset does not work you will need to pop into your local trusted garage and have them scan the diagnostic centre built into your car and see if you have a facia fault. These can be repaired and wiill take about a week. They are usually programmed and possibly part of the cars immobiliser system so do not fit a second hand unit unless you are good at reprogramming!

Apr 16, 2014 | Cars & Trucks

1 Answer

Immobiliser renault scenic

sadly only a person that can lay hands on your vehicle can assist , suggest you see a good auto electrician for this one

Mar 02, 2018 | Cars & Trucks

1 Answer

Micra immobiliser not turning off

try using a scan tool to reset the ECM
having a battery disconnect for any length of time can corrupt the CPU program in the ECM

Nov 24, 2017 | 2002 Renault Clio

1 Answer

How to disarm the immobiliser on rover 200

Is the key fob battery flat? If so fit new CR2032 and re-sync to car by pressing lock 4 times in succession

Jun 09, 2012 | Rover 200 Cars & Trucks

1 Answer

Kia carens 2000 diesel immobiliser problem

The mechanic that you talked to was exactly right

Jan 23, 2010 | 2003 Kia Sedona

3 Answers

Flat battery caused immobiliser problems

1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works

Aug 10, 2009 | Renault Sport Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13652 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides