Question about 1992 Honda Accord

1 Answer

Brake lights The brake lights are on when the headlights are on. Cruise control also does not work. When you step on the brakes it does make them brighter but the dash lights come on when the headlights aren't on. When the headlights aren't on the cruise control works and the brake lights aren't on. When the headlights are on the instrument panel gauge lights up saying the rear brake light on the back window is on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds to me like you may have a instrument cluster problem.

Posted on Oct 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tail lights work only with headlights on. My brake lights and blinkers and cruise contol is not working. Also my heater fan was working on high speed only, now isnt working at all. Fan trouble...


Brake lights are likely not coming on because of a broken brake light switch. It should be above the brake pedal arm and activate the brakes when the pedal moves down. If it is not that you should check all your rear bulbs.
Cruise control and fan issues will have to be diagnosed.

May 02, 2014 | Cars & Trucks

1 Answer

Headlights flash when brakes used. Overcome by turning headlights on but then stop light on spoiler sometimes comes on. Cruise control cuts out without touching brakes. recent history was blown brake...


make sure the previously replaced bulb was the correct one and is installed correctly. it is a short between the tail light circuit and brake light circuit, this could even be a faulty bulb or bulb holder, the cruise will cut out if the brake light comes on, even if you dont touch the brakes

Apr 26, 2011 | 1998 Nissan Maxima

2 Answers

When headlight are on and hit the beake pedal only the 3rd brake light comes on the rest are stuck . When i release brake pedal it seems like i am driving with my brake light on . but my headlight off...


It may sound silly, but check your brake light bulbs to see if they have been installed incorrectly. Brake light bulbs have two filaments, one for tail light, and a brighter one for brake lights. On some cars if the bulb is installed wrong, the brighter filament will stay on for tail lights. The only other thing I can think of is the wrong bulbs have been installed.

Dec 25, 2010 | Toyota Camry Cars & Trucks

1 Answer

On my 98 Catera the brake lights work during the day but when the headlights come on my brake lights stay on ? Also when the headlights are on my cruise control will not work ??? Any help ????????


Your cruise will not work if the brake lights are on just like the cruise disengages when you hit the brakes.As far as the brake lights with the headlights,sounds like there is something crossed.If you hold your breaklights on with your headlights off is there a glow of the headlights or your running lights.If your rear bulbs are the round push in and turn type make sure they are installes correctly.You may have one where the contact on the bottom of the bulb is causing a jump of power from your running/parking light over to the brake light side.Well hope this helps and good luck.

Mar 14, 2010 | 1998 Cadillac Catera

1 Answer

01 Hyundai Elantra - Cruise Control Doesn't Work w/ Headlights On


I had same problem (cruise control/dashboard lights) for the past month with my 2000 Elantra. Replace the tail lights bulbs - my problem was caused by a problem with the double filament within the bulb. Essententially, there was a short when I turned on the lights or hit the brakes.

I did this last night and everything is working properly now.

Sep 10, 2009 | 2001 Hyundai Elantra

1 Answer

When I turn on the Headlights the brake lights stay on and the cruise control won't work also when the head lighta are off the cruise control works but the dash lights come on everytime I press the brake...


hi poss one or both brake light bulbs filaments are touching causing a back feed note if the brake lights are on the cruise control is cancelled

Aug 18, 2009 | 2002 Honda CR-V

2 Answers

2004 Pontiac Montana Brake Lights, Pwr Window and Cruise all Quit


The same thing happened to my 2002 Montana minus the power window problem.

The brake lights and the cruise control are somehow tied in together.

I went to the scrapyard and ripped off a couple circuit boards from an old Lumina ($25 for the set) since there were no Montanas on site.

The problem seems to be when one brakelight goes the bulk of the current transfers to the other light and will blow it too.

Anyways you said you tried replacing the circuit boards and it did not work so sorry I could not be of more help.



Jul 23, 2009 | 2003 Pontiac Montana

1 Answer

Brake lights


You have a defective cruise/brake light switch (pedal activated)

May 18, 2009 | 1994 Honda Accord

1 Answer

No brake or tail lights


Here is some information to consider and check. You should concentrate on the taillights first since that does not require you to constantly step on the brake pedal.

The bulb outage module, or lamp outage module, is located to the left of the drivers left leg while sitting in the seat. It is just slightly up under the dash, clipped into a black housing. It should be a white colored box with one large electrical plug with many wires plugging into it.

The switch above the brake light switch should be a cruise control deactivation switch, so that the cruise control turns off when the brake pedal is pressed.

Apr 30, 2009 | 1999 Mercury Cougar

1 Answer

2002 YUKON XL Denali no brake lights or cruise


FROM LUSTY KID:

Check your bulbs first, I have lost both headlights on my ford at once on account of the bulbs burning out at the same time. Same thing probably happen, you have one filament out. The lights can work, but if the filament for brake is burnt, you don't see brake lights.

As for the cruise control. Check fuse box first. If OK check vacuum hose to actuator in engine compartment for starters.
Advise:

Oct 12, 2008 | 2002 GMC Yukon XL

Not finding what you are looking for?
1992 Honda Accord Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...