Question about 1993 Ford Ranger SuperCab

Open Question

93 ford ranger reverse light switch

Reverse light switch

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: Reverse lights not working on 1993 Ford Ranger

Not sure what transmssion you have but basically it goes from fuse on P/O wire to either the MLP switch on automatic or just a backup lamp switch on manual and leaves the switch on BK/PK wire to the bulbs. Should be easy to trace with a 12v test light.

Posted on Feb 05, 2009

  • 1986 Answers

SOURCE: 2007 ford e350 van, reverse lights wont work

On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Posted on Oct 01, 2009

shivam4529
  • 150 Answers

SOURCE: how to change reverse light bulb on ford fiesta lx 1999

you have to open the boot and go in through that way. you know where the lights are? lift the carpet bit back and you should be able to do it that way. havent tried it myself but going to try and change mine tonite

Posted on Jun 16, 2008

  • 17 Answers

SOURCE: 1993 FORD RANGER 4 WHEEL DRIVE

there is an actuator on the back of the transfer case that likes to fail odds are this is where your problem is. check power and ground here and if you have both replace the actuator

Posted on Dec 01, 2008

emissionwiz
  • 75051 Answers

SOURCE: 1999 Ford Taurus SE no Reverse lights

the reverse lights are controlled by and part of the transmission range selector switch, this switch is the large electrical switch on the top of the trans where the shift cable connects.

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 ford ranger 4cyl, 4spd w/od will not go into 1st and reverse


adjust linkage,if that doesnt work then the clutch needs adjustment or replacement

Jul 16, 2015 | Ford Cars & Trucks

4 Answers

How do I find electrical problem of blowing fuse to backup light when I put truck in reverse for extended period?


It could be in the reverse switch or a wire rubbed through somewhere, or the light could have bad connections, hope this helps

Dec 28, 2014 | 2000 Ford Ranger SuperCab

1 Answer

Reverse light comes on in park on a 93 ford ranger


The Reverse Lt. Switch is out of adjustment.

Apr 06, 2014 | 1993 Ford Ranger SuperCab

1 Answer

Backup lights don't work on my 1997 Ford Ranger


Have you checked the reverse switch on the transmission? Fuse in the fuse box?

Dec 29, 2012 | Cars & Trucks

1 Answer

Reverse lights will not work and I have replaced the bulbs and the fuse


There is a switch that controls the Neutral Safety Switch, and the Back-Up lights with the automatic transmission.

Manual trans usually have a single switch mounted where the shift rail inside the trans causes a switch to turn on the Back-up lights when you shift into reverse. Just a Back-up switch @ 15.00 + Ship on eBay for this type.

good luck

Mar 11, 2010 | 1994 Ford Ranger Supercab

1 Answer

Grinding when in reverse and tries bogging down at lights


stop shifting so hard. your reverse gear is the same exact gear as your first, so if you shift hard and grind that gear a little then reverse will be harder to get into. you probably need your transmission rebuilt the harder your engine has to work the more its going to bogg down

May 14, 2009 | 1987 Ford Ranger

1 Answer

Reverse lights not working on 1993 Ford Ranger


Not sure what transmssion you have but basically it goes from fuse on P/O wire to either the MLP switch on automatic or just a backup lamp switch on manual and leaves the switch on BK/PK wire to the bulbs. Should be easy to trace with a 12v test light.

Feb 05, 2009 | 2006 Ford F-150

1 Answer

1994 Ford Ranger won't shift into drive


In 9 out of 10 cases when I see this problem in the ranger, it is the planetary gear in the transmission. It is made of the cheapest metal available. It breaks usually from going to park before the truck stops or switching from reverse to drive while still rolling. Just a Idea , But I hope it isn't that . Reverse will work fine for a while, and have no forward gears.

Jan 15, 2009 | 1994 Ford Ranger Supercab

1 Answer

Ford Ranger XLT reverse lights on when motor off


replace the park\neutral safety switch it controlles the reverse lights auto trans ---manual trans replace the rev erse light switch
rank my solution

Dec 11, 2008 | 1999 Nissan Frontier

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...