Question about 2006 Holden Commodore SS

Open Question

Hi i want to know if a vr statsmam supercharged v6 will fit in my vr belina ive got the harness and ecu what else do i need

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wat kind of v8 is suitable for a 1997 3.8 v6 holden commodore excutive

your VT /VX came out with a V8 engine
you need the engines ECU and the V8 gearbox
manual diff ratios can be optional

1997 -2002 engines will bolt in

you could go up the next commy V8 model it has roller rockers
you can have a v6 or v8 supercharged if you like

once all bolted in you need a mutt 2 diagnostic reader to reset all the keys and modules and immobilizer for it to start and run




Oct 19, 2016 | Holden Cars & Trucks

1 Answer

Hi there... ive recently converted my auto vy 2 manual and im still running the auto computer out of my vy. was wondering if a vt manual computer wit crowcam chip wil fit and work better then the auto

it can be chipped to such but the VR/VS are interchangable, the VT/VU/VX are the same and VY/VZ are the same. any other combo means a headache. the auto should work fine and you can splice the harness for reverse lights and N to allow starting etc, then just leave the auto switch in N and tucked away.

Sep 28, 2014 | Cars & Trucks

1 Answer

Im trying to figure out if a 1994 4 cylinder

I would say no, you are going to be missing 2 fuel injectors. The inputs and the outputs from the ECU will not be there. If you are wanting to use a 4 cylinder harness to try and repair a V6 harness, you might end up with the connectors and wire you need to repair the V6 harness, but I assure you that you can not put a 4 cylinder harness on a V6 motor and have it work.

Sep 06, 2014 | Cars & Trucks

1 Answer

85 tpi corvette wiring diagram

Are you trying to use your harness and ecu from the existing v6? Please say no cuz the ecu for a v6 will not work well for the v8. I would suggest getting the ecu harness from the vette you got the motor from. GL.

Dec 06, 2013 | Cars & Trucks

1 Answer

I own a 2004 Nissan Patrol, petrol.4.8 lit. I am looking at fitting the Nismo electronic supercharger. Can you please advise on the specific model and also what the expected kW/hp gain would be. How...

The experts here would be the people who sell and fit supercharges to engines . While superchargers give power at low rpms they use a lot of engine power to drive so the power gain is not as significant as a turbo which uses exhaust gasses to get the power and not the engine. Turbos are now capable of producing low end torque early. If the supercharger is electric driven then it will need a big alternator to drive it and again that is reduced engine power. Do a lot of research as there is big money involved to get the extra power.

Sep 23, 2013 | 2012 Nissan 370Z NISMO Coupe 3.7L V6...

1 Answer

I really need help with this car im completely stumped, ive got a 1999 holden VT commodore it has a new standard 3.6L V6 fitted, its been lowered proffesionally, has high flow extractors, a 2 and half inch...

OK mate, see if we can get this sorted.....

When was the 3.6L V6 (I'm guessing an LY7) motor fitted to your VT and has it been running OK or has it always had this fault since being fitted?

400 codes from the ECU rings alarm bells that there is a compatibility problem with either the scantool and the ECU or the ECU and the engine.


I have struck issues in the past where all sorts of wierd things like you describe have been happening and it has been a poor earth to either the ECU or the engine block. (poor earths cause a LOT of problems and really random ones)

Transponder fault does not make alot of sense as it is only going to cause issues on startup, not once the engine is running.

I see the exhaust has been modified...are the factory Oxygen sensors for the 3.6L V6 fitted?

If you can give me some history of the repower ie: who did it, are the engine and ECU matched, where did the motor come from etc. It may give some more clues.



Aug 23, 2010 | 1999 Chevrolet S-10 Pickup

1 Answer

Does a 3.8 supercharged v6 fit into the base model impala?

Yhea it would bolt right in, they sold them from the factory like that. There would be lots of differances though. In the long run it would be cheaper to find a doner car at a wrecking yard, so you can get the wiring harness, pcm, all of the brackets, and verious other things. If you could find a wreck car for sale localy take all of the stuff you will need then you could part out the rest and make some of your money back!

Oct 20, 2009 | 1999 Chevrolet Lumina

2 Answers

Engine compatibility for a 1996 maxda Mx-3 precidia

If you have a 4 cyl motor, that any 4cyl will fit from an MX-3 (and a few other vehicles actually).

If you have a V6, then you can use any other MX-3 1.8L OR MX-6 OR Ford Probe OR Millenia 2.5L V6 motor (160hp)! You can import the KLZE (200hp) from japan for around $1300 and it will also fit (2.5L V6).

any questions, join the forum at

Apr 08, 2009 | 1992 Mazda MX-3

2 Answers

Just a question

The swap is easy but too much to post here. I will fit into any civic 89-00 with the right aftermarket mounts from hasport or just go to ebay. The engine harness can be purchased at a local juck yard if you don't have a harness with 4 injectors. I you have only two injectors then the harness will need to be modified with vtec wiring and ad the other 2 injectors. Any 90-93 integra axles will fit as long as you use the halfshft. Must be manual. and use a modified shif linkage from ebay. Youmust take off the caps behind the civics hubs. Use a PWO or PR3 ECU. Good luck.

Jan 28, 2009 | 1989 Honda Civic

1 Answer

Installation of new cd player in 2002 VR-X Lancer

There are aftermarket wireharnesses available. I suggest the $15-25 purchase. The wires usually match color for color to the aftermarket stereo saving a major head ache if attempting to figure out the factory harness. These adaptors are available at many audo part stores and local installation shops. To check the harness you need, Metra, on of the main aftermarket wire harness manufacturers has an application chart on line, see or a search for American International or Scosche.

Nov 14, 2008 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2006 Holden Commodore SS Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides