Question about 1989 Dodge Ramcharger
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most people think women can't be handy around the house, this is not true, I think this type of mentality should be abandoned. You can do it. The procedure for this should be similar to other cars with slight variation. The main thing to remember is to put marks before you take them apart, because wipers once missalighned is difficult to figure out. You can use something than will write a thin line on the metal parts. When you put them back together you just align the marks you made. Also take a few notes, or even better yet take photo with your cam phone just in case you forget how they go together. If your cell phone don't have a cam, just take notes. You know most cam phones take pretty good pictures that can be blown up on a computer. Well I hope this is helpfull, and always trust yourself. You can do more than you ever think possible.
Posted on Jun 30, 2009
Tips for a great answer:
Feb 05, 2013 | Cars & Trucks
Dec 21, 2012 | 2005 Chrysler Pacifica
The wiper motor on a Volkswagen is located directly underneath the plastic cowl cover. The cowl cover is located directly below the windshield.
Begin by removing the wiper arms by prying off the covers at the base of the arms and removing the nuts that secure the arms to the drive shafts. Label the passenger and driver arms so they can be installed in the same positions. They are not interchangeable. Remove the rubber hood to cowl weather seal. Unscrew the plastic fasteners from the driver's side of the cowl cover, then remove this half of the cover. Remove the fasteners from the passenger's side cowl cover and remove this half of the cover. Disconnect the windshield wiper motor wiring harness by separating the plastic wiring connector. Remove the three bolts that secure the wiper motor to the vehicle's body. Pull the motor slightly away from the body, then remove the nut that connects the motor shaft to wiper linkage. Remove the motor.
Place the new wiper motor into position in the cowl and reconnect it to the wiper arm linkage. Then reinstall the three retaining bolts. Reconnect the plastic wiring connector to the wiper motor wiring harness. Place the cowl covers into position below the windshield and reinstall the plastic fasteners that retain them. Reinstall the rubber hood to the cowl weather seal. Reinstall the wiper arms in the same position you removed them from, along with the wiper arm retaining nuts and lower wiper arm covers. Turn the windshield wipers on and test for proper operation. If the wiper blades slap against the bodywork surrounding the windshield, loosen the nuts that connect the wiper arms to the shafts and adjust.
Aug 06, 2012 | 1994 Volkswagen Golf
Aug 13, 2011 | Nissan Altima Cars & Trucks
Jan 13, 2011 | Nissan Altima Cars & Trucks
Sep 21, 2010 | 2000 Nissan Altima
Jul 18, 2010 | Chevrolet HHR Cars & Trucks
Jan 22, 2010 | 2001 Hyundai Accent
162 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: