Question about Ford Ranger

Open Question

Free diagram timing chain on 90 ford ranger

Setting the timing

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1997 Ford Ranger 3.0 Automatic Timing Belt or Chain?

both

Posted on Apr 16, 2009

  • 195 Answers

SOURCE: 2001 Ford Ranger V6 timing chain

Hello;
The Ford motors are pretty good. I had 280K on a 2.9 V-8 that only needed the oil changed every 3K. Unless you have fluctuatuation in the timing then you should be ok.
These engines use a chain rather than a belt and have excellent life.
Thanks;
Rich RPM Northwest

Posted on Jul 01, 2009

  • 1 Answer

SOURCE: 01 ford explorer sport trac rear timing chain diagram

They will not loan you the tools.....how else will they continue to rip off the average garage junkie and make lots of money?

Posted on Nov 18, 2009

  • 153 Answers

SOURCE: what is timing gear setting diagram, for a 1988 2.3L ford Ranger

i have yet to figure out how to transfer pictures on my computer, you can go to either the Dayco or gates belt web sight for these pictures.

Posted on Feb 28, 2010

kennyz195
  • 61 Answers

SOURCE: 1999 Ford Expedition 5.4L Timing chain setup

.

  1. Remove the engine front cover. For additional information, refer to Engine Front Cover in this section.
  1. Remove the crankshaft sensor ring from the crankshaft.
    a0044041.gif
  1. Rotate the crankshaft until the timing mark on the RH camshaft sprocket is approximately at the 11 o'clock position and the timing mark on the LH camshaft sprocket is approximately at the 12 o'clock position.
    a0049532.gif
  1. Using the special tool, position the crankshaft as shown.
    a0041102.gif
  1. Install the special tool.
    aa5423a.gif
  1. NOTE: LH shown; RH similar.
    Remove the two bolts, the timing chain tensioner and tensioner arm.
    aa5952a.gif
  1. Remove the LH and RH timing chains and the crankshaft sprockets.
    • Remove the special tool from the crankshaft.
    • Remove the timing chains from the camshaft sprockets.
    • Remove the right and left timing chains and the crankshaft sprocket from the crankshaft.
    a0029151.gif
  1. ani_caut.gif CAUTION: The bolts are different lengths and must be returned to their original location.
    NOTE: LH shown; RH similar.
    Remove the bolts and the timing chain guides.
    a0044040.gif
Installation
  1. ani_caut.gif CAUTION: Timing chain procedures must be followed exactly or damage to valves and pistons will result.
    ani_caut.gif CAUTION: Do not compress the ratchet assembly. This will damage the ratchet assembly.
    Compress the tensioner plunger, using an edge of a vise.
    da0605a.gif
  1. Using a small screwdriver or pick, push back and hold the ratchet mechanism.
    da0606a.gif
  1. While holding the ratchet mechanism, push the ratchet arm back into the tensioner housing.
    da0607a.gif
  1. Install a paper clip into the hole in the tensioner housing to hold the ratchet assembly and plunger in during installation.
    a26917a.gif
  1. Remove the tensioner from the vise.
  1. NOTE: There are 61 links in the timing chain.
    If the copper links are not visible, mark two links on one end and one link on the other end, and use as timing marks.
    a0038720.gif
  1. Install the timing chain guides.
    a0044063.gif
  1. Using the special tool, verify correct crankshaft position.
    • Remove the special tool.
    a0041102.gif
  1. NOTE: Crankshaft sprockets are identical. They can only be installed one way. Refer to the following illustration for correct crankshaft sprocket installation.
    If removed, install LH and RH crankshaft sprockets.
    a14824b.gif
  1. Install the LH timing chain onto the crankshaft sprocket, aligning the one copper (marked) link on the timing chain with the slot on the crankshaft sprocket.
    a0041197.gif
  1. Position the LH timing chain on the camshaft sprocket with the two copper (marked) chain links and the camshaft sprocket timing mark aligned.
    a0049191.gif
  1. Position the RH (outer) timing chain on the crankshaft sprocket, aligning the copper (marked) link with the timing mark on the sprocket.
    a0041196.gif
  1. Position the RH timing chain on the camshaft sprocket. Make sure the two copper (marked) links align with the camshaft sprocket timing mark.
    a0041104.gif
  1. NOTE: LH shown; RH similar.
    Position the tensioner arms and tensioners, and install the bolts.
    aa5952a.gif
  1. Remove the tensioner retaining clip.
    a26273a.gif
  1. As a post-check, verify correct alignment of all timing marks.
    a0041106.gif
  1. Remove the special tool.
    aa5423a.gif
  1. Position the crankshaft sensor ring on the crankshaft.
    a0044041.gif
  1. Install the engine front cover. For additional information, refer to Engine Front Cover in this section.


2010&c18=modelyear&c20=n310677&c35=wsm%2ctiming%20drive%20components%2csxj%2c303-01b%2cin-vehicle%20repair&s=1600x900&c=32&j=1.3&v=y&k=y&bw=1171&bh=582&ct=lan&hp=n&[aqe]

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford courier v6 sohc 4.0lt timing chain set up


Register for free at autozone.com, giving your make, year, and engine size.

They will have the diagrams for your ford, and quite a bit of repair information and procedures. Good luck.

May 23, 2012 | Cars & Trucks

1 Answer

What are the timeing marks on a 1996 ford ranger


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Ford Ranger.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1996/make/ford/model/ranger/1996_ford_ranger_timing_belt_diagram_marks.htm

Mar 24, 2010 | 1996 Ford Ranger SuperCab

1 Answer

What are the timeing marks on a 1996 ford ranger 2.3


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Ford Ranger. Plus additional Instructional and Directional Diagrams.

NOTE: No Markings on the Crankshaft Sprocket, it is deferred to the Oil Pump!

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/ford/model/ranger/1996_ford_ranger_timing_belt_diagram_marks.htm

Mar 19, 2010 | 1996 Ford Ranger SuperCab

1 Answer

Need a timing belt diagram for an 88 ford 2.3 engine


CLICK on the following LINK. It has the 1988 Ford Ranger Timing Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1988/make/ford/model/ranger/1988_ford_ranger_timing_belt_diagram_marks.htm

Mar 08, 2010 | 1988 Ford Ranger

1 Answer

What is timing gear setting diagram, for a 1988 2.3L ford Ranger


i have yet to figure out how to transfer pictures on my computer, you can go to either the Dayco or gates belt web sight for these pictures.

Feb 28, 2010 | 1988 Ford Ranger

1 Answer

Where are the marks on the timeing belt


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1986 Ford Ranger. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1986/make/ford/model/ranger/1986_ford_ranger_timing_belt_diagram_marks.htm

Feb 02, 2010 | 1986 Ford Ranger 2WD

1 Answer

I just replaced the front cover of a 2003 Ford, Ranger, 2.3


there are no timing specs for that vehicle, the vehicle pcm does all of that. always mark your gears and chains when you take them off. if you just replaced the cover and thats it, there should be no reason why you would have to set the timing-

May 18, 2009 | 2003 Ford Ranger Regular Cab

1 Answer

1993 ford ranger 3.0L 2wheel drive supercab engine diagram wanted


Easy solution. No other bolts, just pried from the bottom to get the timing chain cover off. Sometimes the simplest things are even difficult. thanks.

Feb 19, 2009 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...