A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
All the other windows work ? Not a fuse , one fuse powers all the windows . Test for B+ voltage at the switch an the window regulator would be the proper diagnostic procedure . Do you own a volt meter ? know how to read a wiring diagram ? how to do basic automotive electrical testing . The Faint click you hear is probably a relay , which means the GEM - genaric electronic modual is energizing the window relay . The windows are computer controlled .
The GEM will activate the OTD Relay until one of the following conditions is met:
The LF regulator control switch is pushed to the UP position.
The LF regulator control switch is released (OFF position) and then moved to the down position (first detent) or one touch down (OTD) position (second detent).
Seven seconds have elapsed since the OTD was initiated.
A window regulator electric drive stall condition is detected on the one touch down sense line inputs.
The UP window operation is not controlled by the GEM. The feature is activated when the delayed accessory is active and the LF window regulator control switch is pressed to the UP position. The switch provides delayed accessory power to one side of the motor and ground to the other side through the one touch down relay. The one touch down relay is not active when the LF regulator control switch is in the UP position.
Passenger windows may be raised or lowered using the LF master control switches or the appropriate passenger window switch. Passenger window switches receive power when the delayed accessory relay is active and the LF remote lock-out switch is in the UNLOCK position. When in the LOCK-OUT position, the passenger windows are deactivated.
The GEM controls manual down and auto down window movement with the down window relay. The relay is activated by applying ground directly to one side of the down window relay coil, and deactivated by removing the ground signal.
The delayed accessory relay provides power for the operation of the power windows and the power moon roof. The delayed accessory feature is active when the ignition switch is in the RUN or the ACC position, or when the ignition switch is changed from RUN or ACC to the OFF/LOCK position and the LF and RF doors are closed.
The GEM will deactivate the delayed accessory feature when:
the LF door is ajar and the ignition switch is in the OFF/LOCK or KEY-OUT position.
the RF door is ajar and the ignition switch is in the OFF/LOCK or KEY-OUT position.
10 minutes have elapsed since the ignition switch was changed from ACC or RUN to the OFF/LOCK position.
LF door open warning switch (open circuit with door closed, grounded with door ajar).
RF door open warning switch (open circuit with door closed, grounded with door ajar).
Ignition switch RUN position (battery potential on both the RUN and RUN/ACC inputs).
Ignition switch ACC position (battery potential on the RUN/ACC input).
Ignition switch OFF/LOCK position (absence of battery potential on the RUN, RUN/ACC, and START inputs).
If you know the power is present, then the auto-relay should work. On some models it is an intermediate switch that is inline with the other power lines. Check the plug connector for alignment problems. If there is no power flowing through the switch, it may have gone bad.
The window to regulator clip has probably come off. See if window goes up on angle. you may have to guide it straight with one hand on both sides of the window just to hold straight while it goes up. That should get you out of trouble until you can have someone pull the trim & check it out