Question about Toyota Cars & Trucks
Changed back right wheel barren
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
Hello. A vibration in the steerign wheel indicates an issue with the front tires. They are either out of balance, and would need to be rebalanced, or it is possible (although remotely) that the tire(s) may be compromised (after hitting a pothole), the belts in the tire may be corrupted. What I would suggest is to take the car to a reputable tire place, and get the balance checked. While the tire is on the balancer, the Tech will be able to see if the tire is out-of-round due to possible road damage. Probably just a tire balance problem. Thanks for choosing FixYA for assistance.
Posted on Feb 03, 2009
OK ON YOUR SPEEDOMETER, THERES TRIP A, TRIP B, AND THE REGULAR ODMO... U NEED TO PUT IT ON TRIP A (WITH THE KEY OFF) ONCE U GET IN ON TRIP A, PUSH AND HOLD THE BUTTON DOWN,WHILE HOLDING BUTTON DOWN TURN KEY ON, YOU WILL SEE LINES POP UP ON THE ODOMETER, (WHERE THE MILES ARE DISPLAYED) THEY WILL GO OUT ONE BY ONE, ONCE IT STATES 0 YOU ARE GOOD TO GO.. GOOD LUCK AND THANK YOU FOR USE FIXYA.COM..KEITH..
Posted on Mar 14, 2009
Could be the lower control are bushing, it apparently is an issue with that model year. Big bucks (850 CDN$) to fix as the 'whole' front end needs to be partially dropped and both should be done at the same time. A mechanic should be able to see if that is a problem while the car is on the hoist. The mechanic should be able to point to the area or point where the contact is being made. Mine lasted till 100,000 km, I heard it on the second hand test drive ( at 90,00 km) and asked a buddy ( a Toyota Master Mechanic) about it and he made me aware of it; i bought the car anyways.
Posted on Mar 23, 2009
Tips for a great answer:
Oct 21, 2015 | 2008 Toyota Highlander
Jun 25, 2015 | 2006 Toyota Camry LE
Feb 03, 2014 | Cars & Trucks
Jan 21, 2014 | Toyota Cars & Trucks
Dec 16, 2013 | Cars & Trucks
Sep 17, 2012 | 1999 Toyota Camry
Jan 25, 2012 | Toyota Camry Cars & Trucks
Jun 08, 2011 | 1995 Toyota Camry
Dec 17, 2009 | 2008 Toyota Camry
Aug 11, 2009 | 1994 Toyota Camry
159 people viewed this question
Usually answered in minutes!