Question about 2002 Pontiac Sunfire

Open Question

Sunfire obd codes - 2002 Pontiac Sunfire

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: check engine light for a 1995 pontiac sunfire

OBD 1.5 OBD 1.5 refers to a partial implementation of OBD-II which General Motors used on some vehicles in 1994 and 1995 (GM did not use the term OBD 1.5 in the documentation for these vehicles - they simply have an OBD and an OBD-II section in the service manual.)
For example, the 94-95 Corvettes have one post-catalyst oxygen sensor (although they have two catalytic converters), and have a subset of the OBD-II codes implemented. For a 1994 Corvette the implemented OBD-II codes are P0116-P0118, P0131-P0135, P0151-P0155, P0158, P0160-P0161, P0171-P0175, P0420, P1114-P1115, P1133, P1153 and P1158.[1]
This hybrid system was present on the GM H-body cars in 94-95, W-body cars (Buick Regal, Chevrolet Lumina ('95 only), Chevrolet Monte Carlo ('95 only), Pontiac Grand Prix, Oldsmobile Cutlass Supreme) in 94-95, L-body (Chevrolet Beretta/Corsica) in 94-95, Y-body (Chevrolet Corvette) in 94-95, on the F-body (Chevrolet Camaro and Pontiac Firebird) in 95 and on the J-Body (Chevrolet Cavalier and Pontiac Sunfire) and N-Body (Buick Skylark, Oldsmobile Achieva, Pontiac Grand Am) in 95.
Depending on the year and the vehicle, a car with the OBD 1.5 system may have either the older OBD-I connector, or the newer OBD-II connector, but they are electrically identical to each other.[citation needed]
The pinout for the ALDL connection on these cars is as follows:
180px-obd-connector-pinout.png magnify-clip.pngFemale OBD connector pinout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 For ALDL connections, pin 9 is the data stream, pins 4 and 5 are ground and pin 16 is battery voltage.
Additional vehicle-specific diagnostic and control circuits are also available on this connector. For instance, on the Corvette there are interfaces for the Class 2 serial data stream from the PCM, the CCM diagnostic terminal, the radio data stream, the airbag system, the selective ride control system, the low tire pressure warning system and the passive keyless entry system.[2]
An OBD1.5 has also been used on Mitsubishi cars of '95 '97 vintage.
An OBD1.5 has been used in some 1995 Volkswagen VR6's (Juice Box's GTI)

Posted on Aug 16, 2008

Ad
  • 1 Answer

SOURCE: check engine light for a 1995 pontiac sunfire

p0441

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 5 po codes they are 132 141 341 342 and 440 Whats going on


oxygen sensors, purge canister (if has filter replace) pressure sensor gas tank. google OBD II Codes, will give you what triggers the code helpful for troubleshooting

Jan 02, 2013 | 1999 Pontiac Sunfire

1 Answer

Code P0440 on 2001 Sunfire


I would say start by replacing the gas cap with a genuine GM product. If that doesn't fix it there are a few more suggestions here --> P0440 @ OBD-Codes.com

Mar 04, 2010 | 2001 Pontiac Sunfire

1 Answer

I have a 1999 Pontiac Sunfire and I had a cjeck engine light come on. I diagnosed it with my OBD 11 and it came up with a 440 code. The gas cap is on tight, where do I go from here Thanks Keith


Take the gas cap off and put it back on then clear the code. This happens some times when the gas cap is put on wrong or not put on at all.

Mar 03, 2010 | 2002 Pontiac Sunfire

1 Answer

Sunfire 2000....started running out of time


You will find a check engine light on in your dash. You must have someone plug a OBD II reader in and pull the codes. The codes will direct you to a reason for the problem.
It can be one of 6 sensors.
Please let me know what you find.

Feb 11, 2010 | 2000 Pontiac Sunfire

1 Answer

Abs and trac mik "on"


if you used a generic form of scanner, you will not get any codes. youre going to need to take it in so they can get into the rest of the system to track down the source of the problem. no obd2 is a protocol.

Dec 28, 2009 | 2001 Pontiac Sunfire

1 Answer

Pontiac sunfire won't start


you could purchase an obd-II code reader and check it that way

Jan 10, 2009 | 2005 Pontiac Sunfire

1 Answer

98 Pontiac Sunfire 2.2l Reading engine codes


you need a OBD-II code reader or take it to autozone they do it free

Oct 23, 2008 | 1998 Pontiac Sunfire

1 Answer

Trying to read error codes 98 pont/sunfire 2.2l


You can't read the codes this way on 95 and newer cars and light trucks (OBD 2 system), you will have to either go to a Kragen auto where they will do it for free or buy a cheap code reader for about $30-40.

Oct 23, 2008 | 1998 Pontiac Sunfire

3 Answers

Check engine light for a 1995 pontiac sunfire


OBD 1.5 OBD 1.5 refers to a partial implementation of OBD-II which General Motors used on some vehicles in 1994 and 1995 (GM did not use the term OBD 1.5 in the documentation for these vehicles - they simply have an OBD and an OBD-II section in the service manual.)
For example, the 94-95 Corvettes have one post-catalyst oxygen sensor (although they have two catalytic converters), and have a subset of the OBD-II codes implemented. For a 1994 Corvette the implemented OBD-II codes are P0116-P0118, P0131-P0135, P0151-P0155, P0158, P0160-P0161, P0171-P0175, P0420, P1114-P1115, P1133, P1153 and P1158.[1]
This hybrid system was present on the GM H-body cars in 94-95, W-body cars (Buick Regal, Chevrolet Lumina ('95 only), Chevrolet Monte Carlo ('95 only), Pontiac Grand Prix, Oldsmobile Cutlass Supreme) in 94-95, L-body (Chevrolet Beretta/Corsica) in 94-95, Y-body (Chevrolet Corvette) in 94-95, on the F-body (Chevrolet Camaro and Pontiac Firebird) in 95 and on the J-Body (Chevrolet Cavalier and Pontiac Sunfire) and N-Body (Buick Skylark, Oldsmobile Achieva, Pontiac Grand Am) in 95.
Depending on the year and the vehicle, a car with the OBD 1.5 system may have either the older OBD-I connector, or the newer OBD-II connector, but they are electrically identical to each other.[citation needed]
The pinout for the ALDL connection on these cars is as follows:
180px-obd-connector-pinout.png magnify-clip.pngFemale OBD connector pinout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 For ALDL connections, pin 9 is the data stream, pins 4 and 5 are ground and pin 16 is battery voltage.
Additional vehicle-specific diagnostic and control circuits are also available on this connector. For instance, on the Corvette there are interfaces for the Class 2 serial data stream from the PCM, the CCM diagnostic terminal, the radio data stream, the airbag system, the selective ride control system, the low tire pressure warning system and the passive keyless entry system.[2]
An OBD1.5 has also been used on Mitsubishi cars of '95 '97 vintage.
An OBD1.5 has been used in some 1995 Volkswagen VR6's (Juice Box's GTI)

Aug 07, 2008 | 1995 Pontiac Sunfire

Not finding what you are looking for?
2002 Pontiac Sunfire Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...