Question about 1997 Nissan Pickup

Open Question

How to replace clutch 97 nissan pickup

4x2

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 32 Answers

SOURCE: need to replace clutch on a 94 nissan pickup i

Recommend purchasing a haynes or chilton repair manual

Posted on Jan 16, 2010

Ad
  • 118 Answers

SOURCE: 97 Nissan Pickup has slow starting...lugs then

Battery low, starter pulling, ( meaning grounding out )

Posted on Jan 18, 2010

  • 11 Answers

SOURCE: how to replace a clutch in a 95 nissan pickup

hELLO remove your transmission from your truck and unplug all lines and electric wire from it and you will see your pusher plate removed all bolts on the pusher plate and remove the plate and the clutch disc also remove the flywell from the engine and get it refaced from the brake shop and also install a new clutch bearing at the same time,you will have to center your clutch disc when you will install the clutch the way to do it is you put the disc and the pusher plate togeter you install the bolt on the pusher plate snog by hand but dont tight it at this time put the centering toll trought the hole in pusher plate and the disc and center the disc and tight the bolts on the pusher plate at this time and remove the toll(if you remove the flywell those bolts have a torque on it be sure to torque the bolts at the right torque for it refer to a mecanic for it and reinstal your transmission.

Posted on Mar 08, 2010

  • 46 Answers

SOURCE: my 97 nissan pickup xe has a noise in engine sound

which engine do you have? a Haynes manual, can walk you through it.. it can be a difficult job if you have a overhead cam engine.. because of the timing chain.. that said depending on the engine millage you may want to replace it also

Posted on Apr 15, 2010

  • 564 Answers

SOURCE: 97 nissan 4cyl pickup w/145,000mi. stalls with air

try a tps throttle posistion sensor the engine is not idling fast enough with the ac on thats why it stalls if you have a manual adjustment on the throttle body speed the engine up 150-200 more rpm this should solve the problem.

Posted on May 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace 97 nissan pickup clutch


I would suggest you get a cheap shop manual to guide you. The basic procedure is put it up on stands, discon battery, remove transmission (or if 4WD sometimes easier to pull engine) remove old clutch parts, resurface flywheel if needed, install new parts using clutch line up shaft, draw down pressure plate bolts in criss-cross pattern and tighten to specified torque (see, you do need a shop manual) and reassemble all. NOTE: clean flywheel and pressure plate suface with Brake-Clean or similar. Replace pilot bushing and throw out bearing too.

Jan 24, 2015 | Nissan Cars & Trucks

1 Answer

Shifting problems 5 sp manual 4x2


Check for clutch master cylinder fluid level.
Top off fluid.
Bleed slave cylinder and adjust clutch travel.

Jan 19, 2014 | 1996 Chevrolet S-10 Pickup

1 Answer

My 1982 nissan pickup manual transmission is stuck in gear


Hi TIM,I got a 85 nissan 720,and check your clutch fluid in reservoir,may be empty,which means your clutch slave cylinder is bad and not holding pressure,here's a link to it,very easy to replace. here's the part.Your clutch master cylinder uses brake fluid,dot 3.

Apr 14, 2013 | 1995 Nissan Pickup

1 Answer

My 97 nissan pickup v4 4x4 is overheating. I have replaced the thermostat, radiator, clutch fan, and the sending unit. What could still be there problem?


Hello, lilfilop and thank you for asking your question on Fixya!

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your
1997 Nissan Pickup, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people in your exact situation.
How to diagnose your overheating
1997 Nissan Pickup

Get more great money saving tips and tricks about your vehicle from: twitter.com/acoates23234

Thanks for the vote, and good luck!

Dec 29, 2010 | 1997 Nissan Pickup

1 Answer

1987 nissan pickup- clutch worked fine one day, next time the pedal went almost to the floor with no resistance, I had about 1" distance from the floor to disengage the clutch. checked the master cylinder...


sounds like your clutch master cylinder or slave is no good. do your self a favor and replace them both if you are going to be replacing them.

Sep 21, 2010 | 1987 Nissan Pickup

1 Answer

97 nissan pickup, idles rough charcoal in purge


you answered your own question if the charcoal cannister is compromised it will also act as a vacuum leak

Jul 18, 2010 | 1996 Nissan Pickup

1 Answer

97 Nissan Pickup has slow starting...lugs then


Battery low, starter pulling, ( meaning grounding out )

Jan 18, 2010 | 1997 Nissan Pickup

1 Answer

How to engage 4x4 in 1995 nissan pathfinder, i just bought a pathfinder that was parked for 4 years and when i tried putting it in to 4wd the lever would not move it felt like it was frozen


My 97 pickup has to be in neutral. Push clutch in push down on 4x4 handle and then shift back or forward on lever. Plus engaging the lockout on hubs.

Oct 04, 2009 | 1995 Nissan Pathfinder

3 Answers

97 Nissan Pickup transmission swap for 95 or 96 transmission?


yes this will fit, model years 88-97 will fit. I would recommend the newest model you can get, as they improved internal hardware after 93. hopefully this helps

Aug 15, 2009 | 1997 Nissan Pickup

1 Answer

91 nissan pickup 4 cyl.


Did you or replace the throw out bearing ? Or the clutch has to be adjusted. does it have a hydraulic clutch ? These have to be bleeded like the master cylinder of the brake sytem.

Aug 13, 2008 | 1991 Nissan Pickup

Not finding what you are looking for?
1997 Nissan Pickup Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...