Question about Cars & Trucks

Open Question

My hyundai elantra 1.6 Gl (J2) drains the battery while I am driving and cuts off

I bought a new battery but the same problem still persists, now I have to interchange two batteries every 5 to 10 kilometers

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: hyundai elantra j2 model 1995

Most of the Public Libraries have all Hyundai manuals

Posted on Mar 04, 2009

  • 1071 Answers

SOURCE: Please provide torque settings for the head bolts

1st stage 45lbs then 65 then 85

Posted on Aug 21, 2009

sodeep
  • 3267 Answers

SOURCE: My clutch does not want to engage, can't push the

There are 2 possibilities.

  1. Since the clutch is hydraulic, some particle is jamming the rod-piston movement, hene the clutch lever is jammed(if using manual transmission)
  2. The springs which press the clutch plate to the engine(cam) are either brken off, meaning the clutch remains engaged all the time and since the hydraulics are not able to push them apart(release the clutch)-applicable for auto or manual trensmission.............. ..sodeep

Posted on Sep 13, 2009

SOURCE: hyundai elantra 1.6GLS J2 torque settings

dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Posted on Sep 23, 2009

  • 1 Answer

SOURCE: hyundai elantra stalls loss of power while

I just had this problem on a 2001 elantra. I took it in for repair: the MAP (Manifold Absolute Pressure/ intake air temp) sensor was shot. $150 later it works just fine.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my Hyundai elantra j2 1.6gl 1999. Voltage at battery terminals when car running 18.4 volts. Could this be the alternator thats faulty, if so how does one test the alternator?


this sounds like a bad alternator/voltage regulator problem. not sure if Hyundai uses a computer control regulator so you might be looking at a computer replacement. have it check out at a shop so your not throwing parts at it that are not needed.

Oct 04, 2014 | Hyundai Motor 1999 Elantra

1 Answer

I want to know if the motor on the 1998 elantra is a j1 modle or j2? Where can I look to see what it is?


The engine ID number is above the trans, printed on the block, below the head. There may be a emission decal under the hood showing a J1 or J2, if you call the Hyundai Parts dept with your VIN number they should be able to tell you.

Sep 07, 2011 | 1998 Hyundai Elantra

1 Answer

Ive replaced clutch and gear lever cables but it still is stiff going down throught the gears also had new gearbox on a j2 lantra


1. replace your gear oil.
2. is this an automatic or manual transmission engine? if manual, adjust your clutch release a little higher than usual to let your clutch engange earlier.

Aug 17, 2011 | 1998 Hyundai Elantra

1 Answer

Can i adjust the timing of my 97 j2 hyundai elantra my self or not. rubenhusselmann@yahoo.com


On the 1997 Hyundai Elantra Ignition Timing is computer controlled. It is non-adjustable.

Dec 29, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

What are the torque settings of the j2 1.8GLS 1996 hyundai elantra


cylinder head bolt torque

10 mm bolts

step 1 22 ft lbs
step 2 additional 60 degrees
step 3 additional 60 degrees

12 mm bolts

step 1 26 ft lbs.
step 2 additional 60 degrees
step 3 additional 60 degrees

exhaust manifold nut 32-41 ft lbs.

intake manifold nut 11-15 ft lbs.

rocker cover 71-86 in. lbs.

Dec 14, 2010 | Hyundai Motor 1996 Elantra

2 Answers

Hyundai elantra 1.6GLS J2 torque settings


dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Aug 31, 2009 | 1995 Hyundai Elantra

1 Answer

Hyundai elantra 2001, battery was bad..bought new


Check in that fuse box for a blown fuse.

Mar 25, 2009 | 2005 Hyundai Elantra

2 Answers

Car stalling


check your fuel pump may not be working

Aug 05, 2008 | 1998 Hyundai Elantra

1 Answer

Hyundai elantra j2 model 1995


Most of the Public Libraries have all Hyundai manuals

Jun 13, 2008 | 1995 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...