Question about 2006 Ford Freestar
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try your spare key first. also, does the anti theft visual indicator (red flashing light) prove out, that is light for three seconds when key is turned to on.
here's some info.
Principles of Operation
The passive anti-theft system (PATS) uses a specially encoded ignition key. Each encoded ignition key contains a permanently installed electronic device called a transponder. Each transponder contains a unique electronic identification code out of over 18 billion, billion combinations.
The passive anti-theft system (PATS), also known as SecuriLock ®, uses radio frequency identification technology to deter a drive-away theft. This system is known as SecuriLock® in North America, Safeguard® in the U.K., and PATS in continental Europe. Passive means that it does not require any activity from the user.
The SecuriLock® System (PATS) is not compatible with NON-FORD remote start systems, which allow the vehicle to be started from outside the vehicle. These systems may reduce the vehicle security level, and also may cause no-start issues. If equipped, the remote start system must be removed before investigation of PATS-related, no-start issues.
Each encoded ignition key must be programmed into the vehicle's powertrain control module (PCM) before it can be used to start the engine. The correct ignition key is a different design than prior model years. Consult the Rotunda Key Ordering Guide for the correct part number. There are special diagnostic repair procedures described in this section that must be carried out if a new encoded ignition key is necessary.
This system contains a new feature named Unlimited Key Mode. This feature allows a customer to program more than eight keys to the vehicle if they request it. Each vehicle in Unlimited Key Mode is set up with a special unlimited transponder security key. This allows all the customer vehicles to share the same keys, but no other keys from outside can be used to operate the vehicles. For an individual customer, any randomly selected security key is acceptable. Refer to Unlimited Key Mode Programming in Key Programming Switch State Control in this section.
The PATS transceiver module communicates with the encoded ignition key. The module is located behind the steering column shroud and contains an antenna connected to a small electronics module. During each vehicle start sequence, the transceiver module reads the encoded ignition key identification code and sends data to the PCM.
The control functions are contained in the PCM. This module carries out all of the PATS functions, such as receiving the identification code from the encoded ignition key and controlling the engine enable. The PCM initiates the key interrogation sequence when the vehicle ignition switch is turned to RUN or START.
All elements of the PATS must be functional before the engine is allowed to start. If any of the components are not working correctly, the vehicle will not start.
PATS uses a visual theft indicator. The indicator will prove out for three seconds when the ignition switch is turned to RUN or START under normal operation. If there is a PATS concern, this indicator will either flash rapidly or glow steadily when the ignition switch is turned to RUN or START. The PATS system also flashes the theft indicator every two seconds at ignition OFF to act as a visual deterrent.
PATS will be activated and will disable the vehicle from starting if there is:
Posted on Jan 09, 2009
You need to spin it as you push it in. Go to advance/autozone and get the rear brake loaner tool. Its part of their loaner tool program and doe snot cost anything after you bring it back.
Posted on Apr 02, 2009
SOURCE: Water Pump Drive Belt
there is no water pump drive belt...there's a "Serpentine" belt that powers ALL the accessories and cooling...If you've never done this before, take it to a mechanic (NOT THE DEALER) and have it done ($75)
Posted on Jun 23, 2009
Tips for a great answer:
Oct 03, 2015 | 2006 Ford Freestar
Feb 18, 2015 | 2005 Ford Freestar
Jan 08, 2015 | Ford Cars & Trucks
Sep 25, 2014 | 2005 Ford Freestar
Mar 07, 2012 | 2005 Ford Freestar
Sep 24, 2010 | 2006 Ford Freestar
Feb 04, 2010 | 2006 Ford Freestar
Nov 18, 2009 | 2006 Ford Freestar
Apr 20, 2009 | 2006 Ford Freestar
94 people viewed this question
Usually answered in minutes!