Question about 1993 Buick Park Avenue

1 Answer

Gas gauge doesn't work it jumps up and down don't know when I need gas

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Inside the tank there is a small ellectrical unit that slides up and down with a float to tell you how much gas you have this unit has ceased to function and needs to be replaced. This repair should run you somewhere around 3-5 hundred dollars.

ps please rate my answer if you would.
Thanks

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 Mercury cougar gas gauge won't work


Cathy, 1996 Mercury cougar gas gauge not working. Simplest thing to check first is your fuel gage fuse, make sure all fuses are good. The ground wire could be corroded/damaged, sending unit in tank faulty, fuel level gauge in cluster faulty. All things can be tested by a good Tech.,diagnosed and estimate for repair.
1994 Mercury Cougar gas gauge don work
Ford Gas Gauge Does Not Work Help Blue Springs Ford Parts Blog
Diagnose Fuel Gauge

Aug 28, 2016 | Mercury Cougar Cars & Trucks

1 Answer

Where is the fuse for peril gauge in a Citroen c1


Find the problem? No separate fuse for the gas gauge, if the rest of dash and gauges work (the temperature gauge), not a fuse problem.


Take off the electrical connector at the gas tank, find the wire for the fuel sender unit in the tank to the gas gauge, and ground it temporarily to the car body, with the key ON. If the gas gauge needle jumps when grounding the wire, the gauge is good, and the problem is with the sender unit in the tank.

May 10, 2014 | Cars & Trucks

1 Answer

1970 Ford F100 Gas Gauge Not Working


It may be the sending unit in the tank that needs replacing. Here's how you can check: Turn the key on and disconnect the sender unit at the gas tank. Ground the sender unit's wire with a jumper wire from the truck's harness to ground. Watch the gauge. If the gauge on the dash is good, grounding the sender wire will cause the gauge needle to react and should move to full. This would indicate a new sending unit is required. If the gauge doesn't move when the sender unit is grounded, the gauge is bad and needs replacing. Pull the instrument cluster out to replace the gas gauge. Likely any old ford gas gauge might work-back then, there were not so many production changes.

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

2008 sonata fuel gauge jumps up and down


The fuel pump ran dry without gas and now it has a fault. Unplug the battery after you fill it all the way up, then reconnect it. This should cause it to reset and work properly.

Apr 09, 2012 | Hyundai Sonata Cars & Trucks

1 Answer

My oil and gas gauge on my truck jump .... gas gauge works fine till i get to about half a tank then it starts jumping.. oil gauge jumps from the time i start my car and regulates but when i slow down or...


You probably have a bad sending unit for the fuel level in the tank. this would cause the gauge to be erratic when the level is below 1/2 tank and the float is moving around much more than when full. The oil pressure gauge problem could be caused buy a loose wire connection or a faulty sending unit.

Mar 04, 2011 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

2001 chevy silverado 4.8 gas gauge not working properly


Fairly common problem with GM vehicles. The sending unit in your tank has a small circuit board that an arm is attached to which moves up and down according to your fuel level. This circuit board and arm are not making good contact. Unfortunately the only good solution is to replace this part.

Oct 28, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

The gas gauge is not registering when gas is put in the van


I don`t know this particular car but I don`t think the dissy has anything to do with the fuel gauge. Did the fuel gauge work perfectly before?? If so, you`ll probably find that you`ve disturbed a connector which goes to the sender unit. It`s very easy to do, I`ve done it myself and it`s VERY annoying to find you`ve sorted one fault only to find that you`ve caused another fault. Just go over everything that you`ve touched and done to the car. Did you short something out when you were replacing the cap, if so, you`ll probably find that a fuse has failed and it`s not just the gauge that doesn`t work. All the best, Ian

Aug 05, 2009 | 1998 Nissan Pathfinder

1 Answer

1993 Jeep Grand Cherokee gas gauge reads empty but tank is full.


Fuel level sending units are known to go bad on these.

Jun 13, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Gas gauge jumps up and down I don't know when I have gas what should I do


you need to replace the gas gauge sending unit in the tank. GM has a lot of problems with this.

Oct 27, 2008 | 1993 Buick Park Avenue

Not finding what you are looking for?
1993 Buick Park Avenue Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...