Question about 1996 Toyota Corolla

Open Question

1996 toyota corolla remove front fender

Need to replace left front fender

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: removing door panel in 2000 toyota corolla

remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.

Posted on Apr 06, 2009

Ad
  • 18 Answers

SOURCE: wheel bearing replacement left front

Diagnosing the bearings can be tricky depending on severity of wear. Typically - drone noise at highway speeds, squeeling, clicking or grinding noises at low speeds that reduce during braking, or pull off the wheel and brake assembly and check the bearing for slack or smoothness of rotation by hand. While doing this, check the brake assembly thoroughly - generally a more likely culprit of wheel noise.

Wheel bearing replacement is not for the novice backyard mech. - you will need pullers, press, etc. If you can get a rebuilt assembly - much easier.

Posted on May 08, 2009

  • 347 Answers

SOURCE: changing headlight 1996 toyota corolla

there are nuts/bolts behind the grill. remove them.

Posted on Sep 18, 2009

  • 4044 Answers

SOURCE: 2005 rotor removal toyota

Yes.

And make sure you pay special attention to the proper torque when you put it back on as well as take care when you remove this since the bearing are apt to fall out.

Posted on Nov 28, 2009

  • 157 Answers

SOURCE: How do you replace the headlight bulb on a Toyota Corolla 2003

You can and it is not difficult, there are two bolts holding the top of the headlight to the body just over the radiator and a couple of screws holding the indicato in place, but you can access the back of the light fitting without doing so . It is a bit of a squeeze on the battery side.

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a L/Front fender on a 1996 Mazda 626


Fenders are bolt on. Remove the plastic inner wheel well. Rais the hood. Remove bolts along too, in door jamb and inner wheel well. Most vehicles also require removing the front bumper cover, headlight assembly and sometimes the grill. You should be able to see the bolt hole locations on the replacement fender. Once you install it do not tighten up the bolts. You'll need to align the fender til the hood to get a narrow consistent seam then tighten the bolts.

Feb 10, 2017 | Mazda Cars & Trucks

1 Answer

2000 toyota corolla...the car was in a crash,damage to driver side front.I have replaced parts(fender,bumper ,etc)but now the park light or signal light will not work.when I turn the turn signal on for the...


you need to check the fuse for it. with no power going to it that is the most likely explanation. other than that, trace the wire from the light and be sure there is no breaks

Aug 26, 2010 | 2000 Toyota Corolla

1 Answer

Replacing fender toyota corolla? front left


My Corolla's (AE100) RPM Counter does not read correctly

Aug 06, 2009 | 1994 Toyota Corolla

2 Answers

Need to replace broke timming belt


remove frt engine cover to replace. make sure u line the teech up on the belt with the pulley marks.. aviod a skmip and no start concern layter

Aug 02, 2009 | 1996 Toyota Corolla

1 Answer

Where is the fuse box on a 2000 toyota corolla


Check up high on the left front kick panel - you will have to get your head right up there.
Also in the engine compartment on the driver side mounted to left inner fender

May 08, 2009 | 1991 Toyota Corolla

1 Answer

Wheel bearing replacement left front wheel Hello Everyone, I may need to replace the wheel bearing on my right front wheel of my Corolla wagon. How can I know for sure? And how can I find out how to do...


Diagnosing the bearings can be tricky depending on severity of wear. Typically - drone noise at highway speeds, squeeling, clicking or grinding noises at low speeds that reduce during braking, or pull off the wheel and brake assembly and check the bearing for slack or smoothness of rotation by hand. While doing this, check the brake assembly thoroughly - generally a more likely culprit of wheel noise.

Wheel bearing replacement is not for the novice backyard mech. - you will need pullers, press, etc. If you can get a rebuilt assembly - much easier.

Apr 23, 2009 | 1996 Toyota Corolla

1 Answer

How long should it take to replace two front hub bearing on 1996 toyota corolla?


It should take about 1 hour.Its not really that hard to get to and remove..Hope this helps you and have a great day..

Apr 01, 2009 | 1996 Toyota Corolla

1 Answer

1996 toyota corolla side marker light removal to install new one


Open the hood. Observe the "tab" on the driver side inner fender, above the corner of the headlamp, outer edge. Remove the screw. Pull the lamp assembly straight forward, towards you. If it has never been out, the lamp will be tight. There are 2 locking pins inside the fender that need to be defeated, you just have to grasp the back side of the lamp (closest to the driver door) and pull it straight towards the front of the car, NOT sideways.

Dec 23, 2008 | 1996 Toyota Corolla

1 Answer

Replace door hinges :toyota levin


There is no need to remove the bumper or the fender. Just remove the door to reach the screws for the hinges mounted to the body- fender side.

Nov 15, 2008 | 1998 Toyota Corolla

1 Answer

How to replace Marker lamp in 1999 Toyota Corolla


Open the hood. Observe the area above the right headlamp, close to the fender. You will see a phillips screw that holds a plastic tab. Remove the phillips screw. After removing the screw, pull the marker lamp assembly towards you. It may be real tight, if it has never been removed before. You need to pull the light assembly out of 2 retention sockets behind the marker lamp. Rotate the bulb socket to get to the bulb, replace the bulb, & slide it back in.Easy job.

Oct 21, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
1996 Toyota Corolla Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...