Question about 2004 Dodge Durango
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Dodge Durango
The p0300 What does that mean?
Basically this means that the the car's computer has detected that not all of the engien's cylinders are firing properly.
A P0300 OBD DTC code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-
The p0430 What does that mean? Basically this means that the O2
downstream of the catalytic converter on bank 2 is detecting that the converter is not working as efficiently as it should be (according to specs). It is part of the vehicle emissions
Posted on Apr 26, 2009
"P done" means there are no codes stored. If there were codes you would see P and 4 numbers.
Posted on May 27, 2009
B223D OCM DTC PRESENT" ocm stand for occupant classification module, Both of these codes go together and show that the passenger seat sensor for the airbag needs to be recallibrated. This needs to be done by a dealership as they have the special set of calibrated weights and can run the tests to be sure it is done correctly. Call dealership to solve this problem.
Posted on Aug 27, 2009
Testimonial: "Thanks you very much that is what we thought was the problem just didn't know how to get it fixed."
Those three codes point to shift solenoid and/or clutch problems according to the Dodge Service Manual
Find someone with a Chrysler scanner and monitor the trans speed sensors, preferably the input one, make sure there is a rpm readings on both when you drive the vehicle, if ok, do a 2nd gear clutch test, if failed, internal clutch failure, if ok, replace the trans solenoid pack, it has an internal failure
Posted on Apr 12, 2010
Testimonial: "Thanks for taking the time to leave me some feedback about my issue. Your feedback was very helpful in helping me understand what my issue is. Thanks"
The code U1120 means, lost wheel distance message. The powertrain control module(PCM) is not
receiving a signal from the anti-lock brake module. The problem could be a short in the bus circuit,
the PCM or the anti-lock brake module. This type of problem is best diagnosed by the dealer or a
local shop with the proper diagnostic scanning equipment. Hope this helps.
Posted on Jan 24, 2011
Tips for a great answer:
May 27, 2012 | 2005 Dodge Durango SLT
May 23, 2012 | 2005 Dodge Durango SLT
Nov 12, 2011 | Cars & Trucks
Jan 24, 2011 | 2004 Dodge Durango
Mar 13, 2010 | 2004 Dodge Durango
Mar 08, 2010 | 2004 Chrysler Sebring
Dec 19, 2009 | 2005 Dodge Grand Caravan
Sep 28, 2009 | 2004 Dodge Caravan
Sep 08, 2009 | 2004 Dodge Durango
207 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: