Question about Cars & Trucks

1 Answer

My rover 25 wont turn over, when i turn the key theres nothing but the car will bump start

I stalled the car earlier and ehen i went to restart it the ignition lights came on but theres no turn over but car will bump statr

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

When you say Bump start, are you talking about push starting your truck?That being the case, I would look at your fuses first, to see if any of them are blown. If you find any blown, just replace them, and try to start it again. Your owners manual should have the location of all your fuses, and what they do. Any that are labeled ignition (ign) would be a culprit if you find it's blown. If you don't find a blown fuse, you may be looking at a solanoid, or starter. Let me know what you find.Dennis

Posted on Feb 21, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: 91 buick regal 3.8 car stalled

I have found the most common part failure issue with the ignition system is the crank sensor, also called by some the TDC sensor.

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I disconnect the alarm on a rover 25


now some rovers will disconnect the alarm with a fuse under the bonnet in the box the top right one if i remember correctly but this was a earlier model that i had a 200 .Now on the rover what happens is if you leave the key in and the door open the alarm locks on ,this is easy enough to turn off if you have the remote but if you do not have a remote?? .Earlier ones you could also bridge a transistor in the computer and this by-passed the alarm but the later ones iam not so sure about ,on a car this age their should be plenty in the scrappers so find one with the keys and remote and remove the whole lot ,computer/key/transponder and change it all over .Or see if the original dealer who will no doubt have another make of vehicle franchise but still have the software to programme it all up for you and supply some new remotes for toy and programme them in .

Jan 19, 2015 | 2004 Rover 25 1.4

2 Answers

Changed transmission fluid on crv now car wont start


might be that you accidentally disconnected the crank sensor close to the transmission, this gives a no start condition without a check engine light on most cars...

Apr 19, 2014 | 2005 Honda CR-V

2 Answers

Ok 03 Yukon, at first not running but after being towed home it hit a bump and all the lights came on. Took it off the wrecker it started right up, but nothing electrical in cab works, and now it won'


It might possibly be the ignition switch, or the linkage to it.

They reason I suspect this is your statement, "I bumped the key forward and it will engage the starter but still wont shut off"

The part where you insert the key is really a "cylinder lock", that then transfers the turning motion to the actual "ignition switch"

My wife had a Pontiac (also a GM product) that the cylinder lock had a linkage that went to the ignition switch (similar to a sliding electric switch, with the 4 positions, ACC, OFF, RUN, START), which was bolted on further down the steering column, underneath the plastic covering on the column.

Another person here had a similar problem, and after suggesting this, he wrote back that he removed his steering column cover and found a screw opposite the cylinder lock that had loosened and fallen out.

So you could try removing the steering column cover and see if all is ok.

Also, when you have it opened up, observe the action as you turn the key, as the problem could be the cylinder lock itself.

Jan 28, 2014 | 2003 GMC Yukon XL

1 Answer

CAR WONT TURNOVER AND START


Immobiliser fob battery dead? Battery flat? Corroded battery or earth terminals? Dead starter motor or relay? Engine seized (will it bump start if manual?)?

You need to describe what happens when you turn the key.

Oct 03, 2013 | 1997 Land Rover Range Rover

1 Answer

I have bmw 316i n reg went out to start it and there was nothing it would bump start so i changed starter motor and next day was fine then day after it done it again does anyone know what it could be...


there may be a damaged wire coming from the receiver ring which sits round your ignition lock, this "reads" your key and allows the starter to turn your engine over so if there is an intermittant fault here that could cause your non-starting.

Jul 18, 2010 | 1996 BMW 318

1 Answer

My Land Rover Discovery started up fine this morning and about 3 miles down the road all the lights went haywire and the Rover stalled out. Now it just clicks when I turn the key and wont start. The...


There is a cable from the battey to the fuse box we had to replace that caused the radio to go off, then the speedometer and then no power from battery.

Dec 28, 2009 | 1998 Land Rover Discovery

1 Answer

Key will not turn to start vehicle.


Try pushing in the key while turning the wheel either way. And jiggling it. This happens because the steering locks for the car's protection. If we park it with the wheels turned, it locks in that position. If that does not work, you may have to call a good mechanic to help you.

Jan 22, 2009 | 1993 Isuzu Trooper

1 Answer

Car wont start. it would turn on at times, but did not seem to turn over as quickly


i have a 1992 isuzu rodeo its 12 deg. out -5 with wind chill truck would not start today played with batt.termanal and started went 1 mile or less to bank and stalled turns over fast but will not restart went back 5 hours later started right up got back home less 1 mile stalled in drive way and wont start.........help

Jul 31, 2008 | 1992 Isuzu Rodeo

1 Answer

It wont start.


If the linstrument or parking lights don't dim slightly as you turn the key in the ignition switch there is a high probability that the problem is with the ignition switch electrical contacts or the related wiriing, not the key. If the problem was the key it would not rotate, just as a padlock or door lock would not rotate. Also check the ignition coil to make certain the wiring is iintact and that the coil is producing a spark to the spark plugs. Be careful not to get shocked by the high voltage output of the coil.

Jul 07, 2008 | 1998 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...