Question about 2006 Renault R5

1 Answer

I own a 93 toyota pick up,just replace the headgasket,after couple weeks of driving it,i nothice power loss,and alot of engiane knocking...and the started noticeing gas smell on my oil dip,and its very thin,my trucks starts just fine buts its idleing very bad..so could it still be my fuel pump,my fuel injector is pretty new too,so i dont know...could it be just faulty spart plugor one cylinder is not igniting right..how do i fix that problem??hoping its not my piston ring,thats my last option...please help...thank u

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

If its kknocking thats not a good sign thats usually a motor rebuild but if its a tap then it could be a lifter or something loose under the valve cover ive had the tapping noise and knocking happen to me tapping on a 67 chevy truck turns out it was the lifters then knocking in a 92 honda accord turns out it was a bent rod so it had to have the motor rebuilt as far as power loss it may have a clog in a fuel line or something shouldnt be the pump unless the vehicle doesnt start or it shuts off while driving, and the smell of gas on the oil dipstick im not to familiar with that but im positive that thats not good;

Posted on Feb 21, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is possible cause of loss of power while driving toyota voxy


check the cat converter for failure and blocking the exhaust system

Nov 08, 2015 | Toyota Cars & Trucks

2 Answers

1995 toyota camry sound from lower timing cover, and loss of power selectively


Depends if it is a no tolerance motor, which means bent valves.

May 24, 2017 | 1995 Toyota Camry

1 Answer

I recently had to replace the headgasket on my 93 honda accord. I replaced the waterpump and timing belt/balance shaft belt a little while back. I had the head checked and installed everything back. And...


funny noises are hard to tell and discribe,could be the waterpump noise or a belt noise, or just the starter wine, you really need someone to listen while you start the car to help pinpoint the area

Apr 14, 2010 | 1993 Honda Accord

2 Answers

I have a 93 gmc c1500 4.3cy v6 with loss of power


The best thing to do is have auto zone check your codes for free and that would be a place to start from.

Feb 23, 2010 | 1995 GMC Sierra C1500

1 Answer

What does code 52 means on the toyota corolla 2000 model in SA.


DTC 52 on a 93 Corolla is a Knock Sensor code. I replace the knock sensor; it is located on the side of the engine block, on the side of the engine that faces the firewall. It is in the center; under the intake manifold.

Thanks for choosing FixYa for assistance.

Mar 09, 2009 | 1993 Toyota Corolla

1 Answer

Has over 200,ooo miles. replaced idler tensioner two months ago, car running better than ever. three weeks ago, rattling sound from engine compartment, than two days later -loss of power. will still drive,...


try(just an idea) knock sensor most of the time a egr scan will not pick it up if its bad , heres how to test it : Disengage the wiring connector from the knock sensor and measure the resistance between the sensor and ground. It should be 3300-4500 ohms
here is the location: http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528017e904

Mar 07, 2009 | 1993 Saturn SW1

2 Answers

Loss of power


Do you know how check if every cilinder is working? with the engine in idle, go to the distribuitor cap and carefully unplug one at the time, every cilinder spark plug wire,in the cilinder you dont see a diference in rpm variation, that cilinder is not working, replace spark plug, if you see spark jumping fron the distribuitor cap torch the spark plug wire, another cause to a cilinder fail could be a loss of compression in one or more cilinder

Oct 29, 2008 | 1994 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...