Question about Cars & Trucks

1 Answer

I have a 1993 Dodge dynasty and I changed the fuses for the dash lights and running lights. They still don't work. Were do i go from here?

Running and dash lights don't work after changing fuses.

Posted by on

  • Lynn Imbrunone Feb 21, 2012

    I have working headlights, brake lights and working turn signals. Just the dash lights and the running lights don't work.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You might have a a wire lose causing it it not to work,I would look and see if their is a lose wire somewhere cauing your lights not to work I hope that helps you Good luck ED...

Posted on Feb 21, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 1993 dodge dynasty check egine

I'm assuming the check engine light is on for no reason. My dad solved this problem very easily: He got a decoder form Ace Hardware (around $15-$20 I think; he told me it wasn't very expensive). He hooked it up to the left interior of his car (driver's side, near the steering wheel area), and it gave him a code, which he then used to consult the manual with. He is a mechanic, so if you aren't one, be careful before you do anything too drastic: you may do more harm than good. GOod luck; I hope I've been helpful.

Posted on Aug 01, 2008

  • 1 Answer

SOURCE: I HAVE A 1990 DODGE DYNASTY.HOW DO I FIX THE HEATER BLOWER THAT STOPPED WORKING?

it could be a 7 dollar resistor thats bad. Thats located behind the fluid washer resovoir.

Posted on Dec 15, 2008

  • 1 Answer

SOURCE: Dodge Dynasty Cruise Control problem

THE 2amp FUSE IS IN THE GLOVE BOX FUSE PANEL.

Posted on Feb 13, 2009

  • 14036 Answers

SOURCE: Dashboard lights dont turn on ('92 Dodge dynasty)

check fuse its behind the glove box door.you another set of fuses in the power distribution center under hood next to left strut tower.

Posted on May 01, 2009

hazel67
  • 8 Answers

SOURCE: heater on 1993 dodge dynasty

Make sure the hoses aren't plugged up before you start tearing things apart. Also check any fuses or relays. The relays are in the engine compartment on the left side just above the battery. If you pop open that lid on the plain unmarked black box, it will tell you what each relay is for. Hope this helps.

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dash lights don't work after changing alternator


Check all fuses and replace any that are blowen.

Feb 08, 2013 | 2003 Ford Focus

2 Answers

2005 PT CRUISER LIGHT ON DASH SAYS NO FUSE RADIO DON'T WRK DOOR LOCKS DON'T WORK INTERIOR LIGHTS DON'T WORK


I hve the same problem go under the hood for the fuse box you will c a fuse that has a blk clip around the whole fuse it self to open it use a small screw driver the ones u use for ur glasses nd open it c if it needs to be changed out if good jst unplug it nd c wat it does on my car I jst unpluged it nd now everything working I think its called a iud some wired name but u can't miss it good luck

Nov 03, 2012 | 2005 Chrysler PT Cruiser

1 Answer

99 chevy dash,parking running lights don't work!


did you replace the dimmer switch on the dash by the headlight switch

Aug 26, 2012 | Cars & Trucks

2 Answers

1997 eclipse dash lights not working i know there are two fuse boxes i dont know which one o look at and which fuse it is help?


Your tail lights, license plate ights, and side marker lights are protected by the same fuse that supplies power to the dash lights. Hint: if your other lights are working, the fuse is NOT blown and you don't have to spend time looking for it.

The next thing that deserves mention is the fact that the dash lights are controlled by the dash light rheostat (dimmer switch). Make sure you don't have them turned off with the switch.

If after reading the above, you still think you need to find the fuse, it is fuse #5 (15 Amp) located in the dedicated fuse and relay box in the engine compartment. It is most likely marked "Taillight Relay".

Please also review the following articles:

Where's The Fuse?

What Else Could Be Wrong?

Sep 18, 2011 | 1997 Mitsubishi Eclipse

1 Answer

Interior lights, moon roof and windows don't work. Changed fuses many times and they kept blowing out.


Why would you change a fuse more than once?

Don't you know what a fuse is for?

If it blows out even once,you have a higher
current load than the fuse is rated at, or a
short to ground

Have the items that don't work correctly ,
diagnosed & repaired.

Jul 13, 2011 | 2008 Ford Fusion

2 Answers

I have a 1996 dakota with no tail lights. The brake lights work. I think it may be a fuse, but I don't have a manual to see what fuse it may be,????


Why would it be a fuse?
You have front parking lights? Then no fuse

If it was a fuse ---would that fix it -- NO it wouldn't
Why do fuses blow?

Have you even removed the tail light housing & checked the bulbs,
or checked the sockets for ground or under truck for wiring
harness issues?

Don't need a manual to check all fuses under the dash &
in the box near brake booster

Jul 01, 2011 | 1996 Dodge Dakota

1 Answer

No dash lights, power locks don't work, fuel gadge doesn't work, radio doesn't work.


all these circuits share some common fuses, check fuse #6 ( 10 amp ), fuse # 11 ( 15 amp ) & fuse #12 ( 10 amp ) all in the inside fuse box at the left end of the dash.....good luck

Jun 20, 2011 | 2000 Mitsubishi Diamante

2 Answers

Need to replace the turn signal flasher. the dash lites & tail lights don't work.


It is located behind the fuse block on the driver's side. When you open the drivers door you can plainly see the fuse block. (marked "FUSES") Flasher is behind that. You have to get to it from under the dash. Take out panels under steering wheel. If you get your head down by the brake pedal you can see it.
When someone changed theirs, they took out the little bracket that holds it in and relocated it to a lower place - they clipped the flasher bracket onto the little access door closest to the emergency brake (on the panel that you have to take out). Luckily the wires were long enough to enable this, so if you have to change it again, it's a lot easier.

May 10, 2011 | 1995 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...